Abstract:Considering the indispensable of pH for tap water, a pH sensor with the characteristics of an implantable, long-term stable, and long lifetime is urgently needed for on-line and in situ pH monitoring in tap water, but this is always a challenging issue. In this article, a competitive integrated electrochemical pH sensor is developed and batch manufactured via micro-electro-mechanical system (MEMS). A dense and ultrasensitive IrOx electrode is obtained for almost 1.5 times Nernst response (−82.88 mV/pH), after preparation process optimization. A Si-Si3N4-KCl agar gel-polydimethylsiloxane (PDMS) multilayer structured Ag/AgCl electrode is designed and proven to be a long lifetime (>40 days) and be stable. By integrating with the IrOx film and solid-state Ag/AgCl electrode on a mini chip and verifying the effectiveness of the as-fabricated sensor by pH detection, the miniature pH sensor demonstrates wide detection range (1.8–12), stirring sensitivity, desirable linearity ( ${R}^{2}=0.999$ ), ideal repeatability and good resistance to other interference substances. Particularly, by employing the mass-production technique, favorable response consistency (relative standard deviation (RSD) < 2%) is witnessed, offering the opportunity to mass-produce the proposed sensor in the future. What’s more, the sensor still kept 91.7% sensitivity when compared to the sensitivity obtained at its initial state, after continuously operating for 32 days. Undoubtedly, the sensitive, durable, miniaturized, and mass-produced pH sensor proposed in this article is a competitive device to implant into the water pipeline for pH in situ online monitoring.

Development of SPEEK-Coated IrOx Sensor for High-Biomass Aquatic Ph Monitoring

Development of SPEEK-Coated IrO x Sensor for High-Biomass Aquatic pH Monitoring

Effects of Structures on the Sensing Properties of Long-Term Stable IrOx Ph Electrodes

Elimination of Oxygen Interference in the Photoelectrochemical Sensor with Ferricyanide Shield Oxygen Reduction for Point of Care Testing.

A New Electroplated Ir/Ir（OH） X Ph Electrode and Its Application in the Coastal Areas of Newport Harbor, California

High anti-interference ability induced by the SP/SiOx/ImIL composite film on IrOx pH electrodes

Highly Sensitive Dissolved Oxygen Sensor with a Sustainable Antifouling, Antiabrasion, and Self-Cleaning Superhydrophobic Surface

Integrated Water Quality Monitoring System with Ph, Free Chlorine, and Temperature Sensors

A Novel Chemical Sensor with Multiple All-Solid-state Electrodes and Its Application in Freshwater Environmental Monitoring.

Enhanced Stability And Re-Usability Of The Optical Sensor For Ph Monitoring Using A Layer-By-Layer Deposition Technique

Design of the Smart pH Sensor Based on Ion Selection Electrode

In Situ pH Monitoring in Turbid Coastal Waters Based on Self-Electrodeposition Ir/IrO 2 Electrode

Material Selection in Making Electrochemical Impedance Spectroscopy Sensor for Electrolyte Thickness Measurement in Marine Atmosphere

Batch Fabrication of Microminiaturized pH Sensor Integrated With IrOx Film and Solid State Ag/AgCl Electrode for Tap Water Quality Online Detection

A Fabrication of Iridium Oxide Film Ph Micro-Sensor on Pt Ultramicroelectrode and Its Application on In-Situ Ph Distribution of 316L Stainless Steel Corrosion at Open Circuit Potential

Maintenance-free antifouling polymeric membrane potentiometric sensors based on self-polishing coatings

Robust Single-Piece All-Solid-State Potassium-Selective Electrode with Monolayer-Protected Au Clusters

Fabrication of a Miniature Multi-Parameter Sensor Chip for Water Quality Assessment

Iridium oxide and cobalt hydroxide microfluidic-based potentiometric pH sensor

High-performance dissolved oxygen sensors based on platinum(II) porphyrin embedded in polystyrene beads

Fast deployable real-time bioelectric dissolved oxygen sensor based on a multi-source data fusion approach