Abstract:The main objective of this paper is to study the behaviour and design of high strength steel columns at elevated temperatures using finite element analysis. In this study, equations predicting the yield strength and elastic modulus of high strength steel and mild steel at elevated temperatures are proposed. In addition, stress–strain curve model for high strength steel and mild steel materials at elevated temperatures is also proposed. The numerical analysis was performed on high strength steel columns over a range of column lengths for various temperatures. The nonlinear finite element model was verified against experimental results of columns at normal room and elevated temperatures. The effects of initial local and overall geometrical imperfections have been taken into consideration in the analysis. The material properties and stress–strain curves at elevated temperatures used in the finite element model were obtained from the proposed equations based on the material tests. Two series of box and I-section columns were studied using the finite element analysis to investigate the strength and behaviour of high strength steel columns at elevated temperatures. Both fixed-ended stub columns and pin-ended slender columns were considered. The column strengths predicted from the finite element analysis were compared with the design strengths predicted using the American, European and Australian specifications for hot-rolled steel columns at elevated temperatures by substituting the reduced material properties. In addition, the direct strength method, which was developed for the design of cold-formed steel columns at normal room temperature, was also used in this study to predict the high strength steel column strengths at elevated temperatures. The suitability of these design rules for high strength steel columns at elevated temperatures is assessed. Generally, it is shown that the American and European specifications as well as the direct strength method conservatively predicted the column strengths of high strength steel at elevated temperatures. The European Code predictions are slightly more conservative than the American Specification and the direct strength method predictions.

Web crippling tests of cold-formed stainless steel tubular sections at elevated temperatures

Design of Cold-Formed Stainless Steel RHS and SHS Beam–columns at Elevated Temperatures

Web crippling of stainless steel built-up I-sections under End-Two-Flange loading: Tests, simulations and design

Experimental investigation of cold-formed steel material at elevated temperatures

Numerical Analysis for Behavior of Stainless-Steel Web Cleat Connections at Elevated Temperatures

Cold-formed steel lipped channel columns at elevated temperatures

Finite Element Analysis of Cold-Formed Stainless Steel Tubular T-Joints at Elevated Temperatures

Compression Tests Of Cold-Formed Steel C- And Z-Sections With Different Stiffeners

Corner Properties Of Cold-Formed Steel Sections At Elevated Temperatures

Design of Cold-Formed Steel Built-Up Closed Sections with Intermediate Stiffeners

Behavior of High Strength Structural Steel at Elevated Temperatures

Design of high strength steel columns at elevated temperatures

Behaviour of Cold-Formed Stainless Steel Beams at Elevated Temperatures

Deterioration of Mechanical Properties of Novel Constructional Steel Material at Elevated Temperatures

BEHAVIOUR OF HIGH STRENGTH COLD-FORMED STEEL COLUMNS UNDER ELEVATED TEMPERATURES

Corner material properties of cold-formed lean-duplex stainless steel sections at elevated temperatures

Numerical Investigation and Design Suggestion on Patch-Loading Strength of Q690 High-Strength Steel Plate Girders at Elevated Temperature

Tests and Behaviour of Cold-Formed Stainless Steel Tubular X-Joints

Experimental Investigation of Cold-Formed Stainless Steel Tubular T-Joints

Web crippling design of channel beams: Carbon steel, stainless steel and aluminium

Nonlinear web crippling analysis and design of cold-formed high strength steel channel sections having different stiffened flanges