Abstract:In this paper, the single-event burnout (SEB) and reinforcement structure of 1200 V SiC MOSFET (SG-SBD-MOSFET) with split gate and Schottky barrier diode (SBD) embedded were studied. The device structure was established using Sentaurus TCAD, and the transient current changes of single-event effect (SEE), SEB threshold voltage, as well as the regularity of electric field peak distribution transfer were studied when heavy ions were incident from different regions of the device. Based on SEE analysis of the new structural device, two reinforcement structure designs for SEB resistance were studied, namely the expansion of the P+ body contact area and the design of a multi-layer N-type interval buffer layer. Firstly, two reinforcement schemes for SEB were analyzed separately, and then comprehensive design and analysis were carried out. The results showed that the SEB threshold voltage of heavy ions incident from the N+ source region was increased by 16% when using the P+ body contact area extension alone; when the device is reinforced with a multi-layer N-type interval buffer layer alone, the SEB threshold voltage increases by 29%; the comprehensive use of the P+ body contact area expansion and a multi-layer N-type interval buffer layer reinforcement increased the SEB threshold voltage by 33%. Overall, the breakdown voltage of the reinforced device decreased from 1632.935 V to 1403.135 V, which can be seen as reducing the remaining redundant voltage to 17%. The device's performance was not significantly affected.

Single-event effect hardening of the Schottky contact super barrier rectifier (SSBR) with high-k gate dielectric

Comprehensive experimental study on Schottky contact super barrier rectifier

Analyses and Experiments of the Schottky Contact Super Barrier Rectifier (SSBR)

Study on Novel Schottky Contact Super Barrier Rectifier with Deep Isolated MOS Trench in Epitaxial N-Drift Layer

Silicon-Controlled Rectifier Stacking Structure for High-Voltage ESD Protection Applications

High Single-Event Burnout Resistance 4H-Sic Junction Barrier Schottky Diode

Research on Single-Event Burnout Reinforcement Structure of SiC MOSFET

Effect of poly-silicon gate on ESD protection performance of LDMOS-SCR devices

Reverse Recovery Enhanced and Single-Event Effects Hardened Power Schottky Source MOSFET With Integrated Retrograde p-Well Schottky Contact Super Barrier Rectifier

Simulation Study of Single-Event Burnout in GaN MISFET With Schottky Element

High Performance of Trench Schottky Contact Super Barrier Rectifier With a p-Injector

Research of Single-Event Burnout in 4H-Sic JBS Diode by Low Carrier Lifetime Control

Design and simulation of high performance β-Ga 2 O 3 super barrier rectifier with a current blocking layer

Analysis of SEB and SEGR in Super-Junction MOSFETs

Design and Optimization of Planar Mesa Termination for Diamond Schottky Barrier Diodes

Development of 400 V-tolerant Single-Event Effect Hardened 4H-SiC Schottky Diode with linear energy transfer upto 83.5 MeV·cm 2 /mg

Experimental and numerical analyses of high voltage 4H-SiC junction barrier Schottky rectifiers with linearly graded field limiting ring

Seb Hardened Power Mosfets with High-K Dielectrics

Improved Planar MOS Barrier Schottky (PMBS) Rectifier with High-k Dielectrics

Analysis of Single Event Response and Hardening Methods in 1.2 kV SiC Power MOSFET With Multicell and Termination Structure

Electrical Characteristics of 10-Kv 4H-Sic MPS Rectifiers with High Schottky Barrier Height