Abstract:Amorphous indium gallium zinc oxide (a-IGZO) thin-film transistors (TFTs) have attracted considerable attention for cutting-edge and next-generation electronics applications because of their high field-effect mobility, low leakage current, superior uniformity, and high transparency. On the other hand, maintaining stable electrical performance under the influences of various ambient effects and complex operating environments is a serious application problem. Hence, a fluoroacrylate-incorporated polytetrafluoroethylene (F–P) is proposed as a new material for passivation layers (PVLs) of a-IGZO TFTs. Solution process-based F–P PVLs were introduced to overcome the intrinsically brittle nature of inorganic materials and enhance the long-term stability of organic materials because of their excellent flexibility, hydrophobic, and chemical stability. This also provides a simple and cheaper alternative for practical applications. The F–P PVLs with different concentrations exhibited appropriate improvements in stability and electrical performance. Of these, the 1.0 wt. % F–P passivated IGZO TFTs showed improved performance in saturation mobility ( μ sat ) from 6.23 ± 0.21 to 7.02 ± 0.38 cm 2 /Vs, an on-off current ratio ( I on / I off ) from (4.05 ± 0.84) × 10 5 to (3.75 ± 2.32) × 10 8 , and a subthreshold swing ( SS ) from 1.79 ± 0.30 to 0.41 ± 0.04 V/decade compared to the pristine device without the F–P PVL. After the 15-day stability test via ambient effects, μsat increased from 7.02 ± 0.38 to ~8 cm 2 /Vs; I on / I off increased from (3.75 ± 2.32) × 10 8 to ~10 10 and the SS values were maintained at a low level (≤ 0.6 V/dec.). The improvement was induced by lower surface energy and better hydrophobicity from F–P PVLs, which can effectively reduce the adsorption behavior of H 2 O and O 2 . With a lower oxygen-related interface trap density, the electrical performances were improved by a suitable concentration-based F–P PVL. In addition, the F–P PVL can provide a long-term guarantee of stability and reliability for a-IGZO TFTs, which will have potential applications for wearable devices and multi-environment electronics devices.

Highly Stable Flexible Thin-Film Transistors in Harsh Environments by Superhydrophobic Passivations

Enhanced Electrical and Mechanical Performance of InSnZnO TFTs With Multifunctional Laminated Organic Passivation Layer

Eco-Friendly, Water-Induced In2O3 Thin Films for High-Performance Thin-Film Transistors and Inverters

Highly Stable Atomic Layer Deposited Zinc Oxide Thin-Film Transistors Incorporating Triple O 2 Annealing

Effect of Self-Assembled Monolayers (SAMs) as Surface Passivation on the Flexible a-InSnZnO Thin-Film Transistors

Surface Passivation Engineering Approach to Fluoroacrylate-Incorporated Polytetrafluoroethylene for Highly Reliable a-IGZO TFTs

Solution-Processed Zinc Oxide Thin-Film Transistors with a Low-Temperature Polymer Passivation Layer

Improving Reliability of a-InGaZnO TFTs With Optimal Location of Al2O3 Passivation in Moist Environment

High Reliability Of Igzo Tfts Using Low-Temperature Fabricated Organic Passivation Layers

Improved Environmental Stability of InSnO Thin-Film Transistor by Interface Engineering

Effect of Sc2O3 Passivation Layer on the Electrical Characteristics and Stability of InSnZnO Thin-Film Transistors

Teflon/SiO2 Bilayer Passivation for Improving the Electrical Reliability of Oxide TFTs Fabricated Using a New Two-Photomask Self-Alignment Process

Self-Assembled Monolayers (sams)/al2o3 Double Layer Passivated InSnZnO Thin-Film Transistor

Thin-film Transistors Based on Poly(3,3‴-Dialkyl-quarterthiophene) and Zinc Oxide Nanowires with Improved Ambient Stability

High-Performance Flexible ZnO Thin-Film Transistors by Atomic Layer Deposition

Effective encapsulation of ZnO thin film transistors controlled by thermal energy

Effect of Sc 2 O 3 Passivation Layer on the Electrical Characteristics and Stability of InSnZnO Thin-Film Transistors

Influence of passivation deposition on the performance of In-Zn-O thin-film transistors based on etch-stopper structure

The Hump Phenomenon and Instability of Oxide TFT Were Eliminated by Interfacial Passivation and UV + Thermal Annealing Treatment

Al 2 O 3 /HfO 2 Bilayer Dielectric for Ambipolar SnO Thin-Film Transistors With Superior Operational Stability

Bilayer-passivated stable dif-TES-ADT organic thin-film transistors