Abstract:This study aimed to investigate the mechanical behavior of an environmentally friendly granulated blast furnace slag-based geopolymer matrix reinforced with modified multi-walled carbon nanotubes (MWCNTs). The modified MWCNTs were obtained using a modification method combining nitric acid and sulfuric acid and were then dispersed using sodium dodecylsulfate (SDS) as a dispersant. Two types and three concentrations of MWCNTs were mixed directly into the aqueous solution, sonicated, and then mechanically mixed with waste granulated blast furnace slag to form the geopolymer matrix. Raman and Fourier transform infrared (FT-IR) spectroscopy were used to evaluate the ordered structure and crystallization degree of the modified MWCNTs. Then, the dispersity of the modified MWCNTs was characterized using transmission electron microscopy (TEM). The compressive and bending strengths were measured to evaluate the mechanical behavior of specimens. Moreover, the polycondensation products, polycondensation degree, pore structure, and microscopic morphology of the geopolymer matrix were analyzed using X-ray diffraction (XRD), FT-IR spectroscopy, nuclear magnetic resonance (NMR), mercury intrusion porosimetry (MIP), and field emission scanning electron microscopy with energy dispersive X-ray spectroscopy (FESEM-EDS). The experimental results showed that the incorporation of 0.1% functionalized MWCNTs had an optimal influence on the fluidity and mechanical behavior. The slump diameters of geopolymers with 0.1% functionalized MWCNTs with and without SDS were increased by 16.3% and 23.5%, respectively, compared with the reference geopolymer matrix. For geopolymer matrix samples at a curing age of 28 d, the compressive strength of geopolymers with 0.1% functionalized MWCNTs with and without SDS were increased by 16.3% and 17.6%, respectively. For the bending strength, the corresponding increases were 17.6% and 18.7%, respectively. It was found that functionalized MWCNTs could increase the degree of polycondensation, leading to a more traditional amorphous N-A-S-H phase, a finer C–S–H phase, more Q4 (2Al) and Q4 (3Al), and lower porosity. In addition, the propagation of micro-cracks in the geopolymers was inhibited by the incorporation of functionalized MWCNTs.

Microwave-thermal-assisted curing method on geopolymer preparation from Panzhihua high-titanium slag by alkali activation

Effect of different curing methods on the preparation of carbonized high-titanium slag based geopolymers

Effect of Curing Temperature on High-Strength Metakaolin-Based Geopolymer Composite (HMGC) with Quartz Powder and Steel Fibers

Preparation and electromagnetic wave absorption characteristics of multifunctional light-weight high titanium slag-based foam geopolymer

Performance Characteristics of Micro Fiber-Reinforced Ambient Cured One-Part Geopolymer Mortar for Repairing

Effect of Microwaves on the Rapid Curing of Metakaolin- and Aluminum Orthophosphate-Based Geopolymers

Effects of Spodumene Flotation Tailings on Mechanical Properties of Acid-Based Geopolymer Mortar

Alkali-hydrothermal activation of mine tailings to prepare one-part geopolymer: Activation mechanism, workability, strength, and hydration reaction

Influence of the Activator Concentration and Solid/Liquid Ratio on the Strength and Shrinkage Characteristics of Alkali-Activated Slag Geopolymer Pastes

Thermal stability and microstructure of metakaolin-based geopolymer blended with rice husk ash

Preparation and curing method of red mud-calcium carbide slag synergistically activated fly ash-ground granulated blast furnace slag based eco-friendly geopolymer

Investigation of Setting Time and Microstructural and Mechanical Properties of MK/GGBFS-Blended Geopolymer Pastes

Influence of modified multi-walled carbon nanotubes on the mechanical behavior and toughening mechanism of an environmentally friendly granulated blast furnace slag-based geopolymer matrix

Strength and microstructural analysis of geopolymer prepared with coal-based synthetic natural gas slag

Effect of Organic Polymers on Mechanical Property and Toughening Mechanism of Slag Geopolymer Matrix

A microwave irradiation-persulfate-formate system for achieving the detoxification and alkali-activated composite geopolymerization of the chromate-contaminated soil

Geopolymer bricks prepared by MSWI fly ash and other solid wastes: Moulding pressure and curing method optimisation

Mechanical activation of coal gasification slag for one-part geopolymer synthesis by alkali fusion and component additive method

Using mechanical activation of quartz to enhance the compressive strength of metakaolin based geopolymers

Comparison of Mechanical Properties of the Geopolymer-Solidified Soils Activated by Two Alkaline Oxides

Effect of microwave curing on the properties of aggregate-mastic interfacial transition zones in cement emulsified bitumen mixture containing steel slag