Abstract:Cement production emits a large amount of CO 2 into the atmosphere and consumes significant mineral resources, necessitating urgent green transformation in this traditional industry. To address carbon emissions in the building materials sector and effectively utilize industrial solid waste, this study presents the preparation of geopolymer mortar using a ternary mixture of fly ash (FA), slag (GGBS) and red mud (RM), making full use of the advantages of each component to optimize the mix proportion. The mix proportions are determined using the simplex-centroid experimental design method, with NaOH concentration (8 M, 10 M, 12 M) as the independent variable, aiming to meet multi-objective performance requirements including fluidity, setting time, flexural strength, and compressive strength. The microstructure and composition of hydration products are examined through scanning electron microscopy (SEM) and X-ray diffraction (XRD). Finally, the optimal mix proportion range is proposed. Results indicate that: (1) When the concentration of NaOH increases, the setting time is shortened, and the mechanical properties first increase and then decrease. The optimal alkali concentration is 10 mol/L. (2) RM and FA exhibit similar effects on mechanical properties, suggesting RM can replace FA in geopolymer material preparation. Besides, RM significantly reduces fluidity. (3) GGBS enhances mechanical properties and shortens setting time. The increase of GGBS content provides more CaO for the matrix and generates more compact C-S-H gel, and thus, the flexural strength and compressive strength of the geopolymer mortar are improved. When GGBS blending amount is 50 % and NaOH is 10 M, the flexural strength and compressive strength of mortar can reach 15.66 MPa and 69.06 MPa, respectively. (4) The simplex-centroid experimental design method provides a mix proportion design method that can meet the requirements of multiple properties at the same time.

Geopolymer bricks prepared by MSWI fly ash and other solid wastes: Moulding pressure and curing method optimisation

Preparation and curing method of red mud-calcium carbide slag synergistically activated fly ash-ground granulated blast furnace slag based eco-friendly geopolymer

Utilization of municipal solid waste incineration fly ash with red mud-carbide slag for eco-friendly geopolymer preparation

Preparation and performance optimization of fly ash- slag- red mud based geopolymer mortar: Simplex-centroid experimental design method

Mechanical and Microstructure Characterizations of Geopolymer Mortars Using Industrial Waste Materials

Designing low-carbon fly ash based geopolymer with red mud and blast furnace slag wastes: Performance, microstructure and mechanism

Preparation of Red Mud-Based Geopolymer Materials from MSWI Fly Ash and Red Mud by Mechanical Activation.

Performance deterioration of municipal solid waste incineration fly ash-based geopolymer under sulfuric acid attack

Strength, Microstructure, Efflorescence Behavior and Environmental Impacts of Waste Glass Geopolymers Cured at Ambient Temperature

Preparation and Properties of Porous Concrete Based on Geopolymer of Red Mud and Yellow River Sediment

Synthesis of geopolymer using municipal solid waste incineration fly ash and steel slag: Hydration properties and immobilization of heavy metals

Study on Mechanical Properties and Microstructure of Fly-Ash-Based Geopolymer Solidified Waste Mud

Foundry Waste Reutilization: Anti-shrinkage Geopolymer Based on Nano-Clay and Coal Gangue

The Mechanical and Microstructural Properties of Refuse Mudstone-Ggbs-red Mud Based Geopolymer Composites Made with Sand

Effect of Particle Size and Curing Temperature on Mechanical and Microstructural Properties of Waste Glass-Slag-based and Waste Glass-Fly Ash-Based Geopolymers

Interfacial Behavior of Slag, Fly Ash, and Red Mud-Based Geopolymer Mortar with Concrete Substrate: Mechanical Properties and Microstructure

Mechanical Properties and Mechanism of Geopolymer Cementitious Materials Synergistically Prepared Using Red Mud and Yellow River Sand

Mechanical and microstructural characterization of geopolymers derived from red mud and fly ashes

A high-strength red mud–fly ash geopolymer and the implications of curing temperature

Static Compaction on Coupled Precursors and Optimizing Molarity for Enhanced Strength and Durability of Geopolymer

Cleaner geopolymer prepared by co-activation of gasification coal fly ash and steel slag: durability properties and economic assessment