Comparison of Mechanical Properties of the Geopolymer-Solidified Soils Activated by Two Alkaline Oxides

Guanghua Cai,Caihong Zhang,Gang Zeng,Jinwei Qiu,Yiqie Dong,Haijun Lu
DOI: https://doi.org/10.1007/s40996-024-01379-9
2024-03-02
Iranian Journal of Science and Technology Transactions of Civil Engineering
Abstract:Quicklime (CaO) or reactive magnesia (MgO) could be utilized as a novel activator of ground granulated blast-furnace slag (GGBS) to produce the geopolymer. The geopolymer was used to solidify soft soil, showing a significant environmental benefit over conventional Portland cement. In this study, the geopolymers were made according to the weight ratio of CaO/MgO to GGBS of 1:9 and 2:8 and were further used to solidify silty clay. The engineering and microstructural characteristics of the solidified silty clay were investigated through various physicochemical, mechanical, and microscopic tests. The results indicated that the unconfined compressive strength of the solidified specimens increased with the increase of activator ratio and curing period. The CaO-GGBS (CG)-solidified soil had a higher unconfined compressive strength than the MgO-GGBS (MG)-solidified soil after 7-day curing, while the MG-solidified soil showed good mechanical properties in the long run. The pH and electrical conductivity of the solidified soils gradually decreased with the decreasing binder dosage and the increasing curing period, and these values of MG-solidified soils were lower than those of CG-solidified soils. Based on XRD analysis, the CSH and hydrotalcite were confirmed to be the main hydration product of both CG/MG-solidified soils in filling the large pores, and the reinforcement mechanism model for the soil treated with CG/MG geopolymers was also proposed. The research results demonstrated that CG/MG geopolymers can be used as a binder to solidify soft soils.
engineering, civil
What problem does this paper attempt to address?