Abstract:To achieve high-performance thermoelectric (TE) devices, constructing a good interfacial connection between TE materials and electrodes is as important as having high figure-of-merit TE materials. Although CoSb3-based TE devices have received great attention for power generation recently, the limited long-term service stability is the main obstruct for their applications. In this work, we have prepared two kinds of Ti-based alloys (Ti83.7Al10.7Si5.6 and Ti74Ni26) as the diffusion barrier layer of CoSb3-based TE joints by the spark plasma sintering method and have systematically investigated their interfacial behaviors during the aging process. The performances of contact resistivity and mechanical strength for Ti74Ni26/Yb0.4Co3.8Fe0.2Sb12 TE joints are good before aging treatment but gradually deteriorate during the aging process, which should be ascribed to the phase-transition-induced negative thermal expansion in Ti-Ni alloys. On the other hand, Ti83.7Al10.7Si5.6/Yb0.4Co3.8Fe0.2Sb12 TE joints show both low contact resistivity (<10 μΩ·cm2) and high mechanical strength (>20 MPa) before and after 16-day aging at 500 °C, which is originated from the matching of the coefficient of thermal expansion (CTE) and the formation of network structures in Ti-Al-Si alloys. We have also prepared an eight-couple TE module of p-Ge0.9Sb0.1TeB0.01/n-Yb0.4Co3.8Fe0.2Sb12 and have measured its corresponding device performance. Our work has demonstrated that the matched CTE and network structures in the Ti-Al-Si alloy are key to obtain high-performance CoSb3-based TE joints for long-term service.

Atomic-Resolution Interfacial Reaction Mechanism between Bi 2 Te 3 -Based Alloys and Ni Electrodes

Interfacial Reactions in Ni/Se-90 At.%te and Ni/Pb1-xSnxSe Couples

Effective Atomic Interface Engineering in Bi2Te2.7Se0.3 Thermoelectric Material by Atomic-Layer-deposition Approach

Interfacial reactions in the Ni/(Bi0.25Sb0.75)2Te3 and Ni/Bi2(Te0.9Se0.1)3 couples

Interfacial Reactions Between Ni and Bi-2(Se0.1Te0.9)(3) and Its Constituent Material Systems

Interfacial Reactions in the Sn-Bi/Te Couples

Ni/Te and Ni/Ag2Te Interfacial Reactions

Interfacial Reactions between Sn-Based Solders and n-Type Bi2(Te,Se)3 Thermoelectric Material

Precision Interface Engineering of an Atomic Layer in Bulk Bi2Te3 Alloys for High Thermoelectric Performance

Interfacial Reactions in Thermoelectric Modules

Interfacial Reactions in Ni/Se-Sn, Ni/Se-Te, Ni/Sn-Te and Ni/Se-Sn-Te Couples

Interfacial Reactions in Ni/Sb2Te3 and Co0.2Ni0.8/Sb2Te3 Couples

Recent advances in atomic layer deposition-based interface modification engineering in thermoelectric materials

Co/Bi2te3 Interfacial Reactions and Bi-Co-Te Phase Equilibria

Reaction evolution and alternating layer formation in Sn/(Bi0.25Sb0.75)2Te3 and Sn/Sb2Te3 couples

Enhanced Contact Performance and Thermal Tolerance of Ni/Bi2Te3 Joints for Bi2Te3-Based Thermoelectric Devices

Improved contact performance and thermal stability of Co–Ni alloy barrier layer for bismuth telluride-based thermoelectric devices

Polarity Effect in a Sn3Ag0.5Cu/Bismuth Telluride Thermoelectric System

Interfacial Stability in Bi2Te3 Thermoelectric Joints

Extremely Low Contact Resistivity of Bi 2 Te 3 -Based Modules Enabled by NiP-Based Alloy Barrier

Enhanced Interfacial Reliability and Mechanical Strength of CoSb3-Based Thermoelectric Joints with Rationally Designed Diffusion Barrier Materials of Ti-Based Alloys