Abstract:Leakage power, now the largest contributor to integrated circuit power consumption, is rising quickly, according to the International Technology Roadmap for Semiconductors (ITRS). As CMOS (complementary metal-oxide semiconductor) technology continues to shrink to deep submicron levels, gate leakage and subthreshold have become important components that contribute to total power dissipation. To address this problem, many methods have been put forth, especially at the circuit level. In 45 nm CMOS, variability and short-channel effects limit noise margins and compromise gate delays, thereby compromising the timing closure and robustness of ultra-low voltage circuits. The resulting supply voltage guardband may reduce energy efficiency in order to achieve a reasonable production yield. Furthermore, the high leakage currents of these technologies decrease energy efficiency when idle intervals are prolonged. In this study, two designs of a novel two-input NAND gate at 45 nm CMOS technology are constructed using eight transistors (8-T). A novel circuit technique named "In-Triggering (INDEP with Bi-Triggering)" is presented in this study with the goal of lowering subthreshold leakage in digital circuits. This method is thoroughly contrasted with other leakage reduction strategies now in use, such as Base, Sleepy LECTOR, LECTOR, INDEP, and Bi-Triggering procedures. Evaluation is done using key performance measures such power-delay product (PDP), latency, subthreshold leakage power, and total power consumption. 45-nm Predictive Technology Models (PTM) with a nominal supply voltage of 1V are used in the investigation. According to our findings, the suggested In-Triggering technique outperforms the conventional NAND gate in terms of speed by 12% and significantly reduces leakage power by up to 56%. Furthermore, compared to the Base, Trig01, and INDEP NAND gates, the method offers mean power savings of 58.8%, 36.1%, and 30.7%, respectively. At supply voltages of 1V, a comprehensive comparison and verification are then conducted utilizing the several proposed and existing methodologies. The effectiveness of the In-Triggering technique in reducing leakage power in CMOS circuits is confirmed by comparing these results to the most well-known design strategies for both active operation and sleep modes.

Sub-50 mV power supply, recursive stacking body bias NAND gate for extremely low-voltage CMOS LSIs

Variability aware ultra-low power design of NOR/NAND gate using non-conventional techniques

Substrate-engineered GGNMOS for low trigger voltage ESD in 65 nm CMOS process.

High Holding Voltage SCR-LDMOS Stacking Structure with Ring-Resistance-Triggered Technique

Optimized leakage control in CMOS NAND gates: The In-Triggering technique

A Novel Adaptive Reverse Body Bias Technique to Minimize Standby Leakage Power and Compensate Process and Temperature Variations

A new universal gate for low power SoC applications

1-V power supply high-speed digital circuit technology with multithreshold-voltage CMOS

Novel Mixed-Voltage I/O Buffer with Thin-Oxide Cmos Transistors

An Ultra-Low-Voltage Energy-Efficient Dynamic Fully-Regenerative Latch-Based Level-Shifter Circuit with Tunnel-FET & FinFET Devices

A novel mixed-voltage I/O buffer with low-voltage thin-oxide CMOS transistors

An N-channel Graded-Junction Lateral Diffused MOS Transistor in 0.18&#x03bc;m Low-Power Logic CMOS Process

A novel negative quantum capacitance field-effect transistor with molybdenum disulfide integrated gate stack and steep subthreshold swing for ultra-low power applications

A sub-1-V ultra-low power full CMOS bandgap reference woking in subthreshold region

A 40-Nm Ultra-Low Leakage Voltage-Stacked SRAM for Intelligent IoT Sensors

Realization of Extremely High-Gain and Low-Power in nMOS Inverter Based on Monolayer WS2 Transistor Operating in Subthreshold Regime

A Sub-100mV Ultra-Low Voltage Level-Shifter Using Current Limiting Cross-Coupled Technique for Wide-Range Conversion to I/O Voltage

Near-Threshold Sram Design On 40-Nm Cmos Technology For Low Power Design

Low Power and Low Ground Bouncing Noise Nanometer CMOS Full Adder

Compact design of universal gates with non-aligned gate technology and assessment of its performance in a TCAD Environment

Strengthened Complementary Metal-Oxide-Semiconductor Logic for Small-Band-Gap Semiconductor-Based High-Performance and Low-Power Application