Abstract:A series of hydrocracking catalysts based on mesoporous molecular sieves of MCM-41 and SBA-15 with different silica to alumina ratios was prepared. Nickel and molybdenum were used as active metals to impregnate the extrudates prepared by using molecular sieves. The catalysts were characterized for physical and chemical properties and evaluated for the hydrocraking of desulfurised vacuum gas oil. The conversion of DS-VGO was lower as compared to that of the catalyst based on USY zeolite. However, the gas yield was lower in case of mesoporous materials based catalysts. Introduction Zeolites are widely used as catalysts in petroleum refining and for the production of petrochemicals and fine chemicals. Recently, the breakthrough discovery of the M41S family mesoporous materials [1,2] exemplified by the MCM-41 bearing hexagonal-close-packed channels. Despite the excellent structural properties, the hydrothermal stability of MCM-41 and MCM-41-like mesoporous materials was reported as lower than their counter part zeolites. Recently, a new kind of mesoporous silica, SBA-15, has been synthesized with poly (alkylene oxide) triblock copolymers such as poly (ethylene oxide)-poly (propylene oxide)poly (ethylene oxide) (PEO-PPO-PEO) [3]. Beside its uniform and large pore size channels (4.6-30 nm), SBA-15 possesses thick walls (3.1-6.4 nm). Therefore, it has much higher hydrothermal stability than MCM-41 [3]. Owing to their extremely large surface area (generally exceeding 1000 mg) and ultra large pore size these mesoporous materials have attracted great practical and academic interest as acid-catalyzed reactions of large molecules such as hydroprocessing of residual oil [4-5]. In this study, the preparation of MCM-41 and SBA-15 with Si/Al 10, 20 and hydrocracking catalysts based on these mesoporous materials along with USY zeolite are presented. Commercial USY zeolite used in this study also has mesopores in it. Nickel and molybdenum are impregnated as active metals. Mesoporous materials and hydrocracking catalysts prepared were characterized by XRD, surface are, pore volume, pore-size distribution, particle size measurement, and acidity measurement by FTIR and ammonia TPD. The side crushing strength of the extrudates with alumina binder was also measured by crushing strength tester. The catalysts were evaluated for hydrocracking of desulfurized vacuum gas oil (DS-VGO). The hydrocracking activity was measured by GC-SIMDIST method and sulfur and nitrogen contents of the product were measured by elemental analyzer.

Carrier material containing molecular sieve and amorphous silica-alumina and preparation method thereof

Hydrocracking catalyst containing small crystal grain Y-shaped molecular sieve and preparation method thereof

Preparation and Modification of Ceramic Membrane and Its Application in Oil/Water Wastewater Treatment

Synthesis and characterization of amorphous silica-alumina with enhanced acidity and its application in hydro-isomerization/cracking

Monodisperse molecular sieve microsphere and preparation method thereof

Preparation method of honeycomb carrier catalyst for molecular sieve denitration

Study on preparation and surface modification of precipitated silica obtained from fly ash

Advanceson improving the attrition resistance of molecular sieve catalysts for fluidized bed

Synthesis of CuO–ZnO–Al2O3 @ SAPO-34 Core@shell Structured Catalyst by Intermediate Layer Method

Preparation of porous silica microspheres using silica nanoparticles with different morphologies and their properties as catalyst carriers

Preparation of Y-type molecular sieve based on bentonite and study of its performance in hydrocatalytic cracking of shale oil

The Preparation and Modification of Active Alumina

Method for synthesizing monolithic 4A molecular sieve by dry glue process

Preparation of SiO2/(γ-Fe2O3-SiO2 ) Magnetic Catalyst Carrier

Synthesis and Catalytic Performance of MCM-22 Molecular Sieves with High Molar Ratio of SiO_2 to Al_2O_3

Synthesis, Characterization, and Application of Amorphous Silica-Aluminas Support for Fischer-Tropsch Wax Hydrocracking Catalysts

Synthesis and Catalytic Evaluation of Mesoporous Molecular Sieve Supported Hydrocracking Catalysts

Mesogenic agent and hierarchical pore molecular sieve prepared from same

A method of synthesizing a mesoporous MCM-22 molecular sieve and uses of the molecular sieve

A carrier for olefin oxidation catalyst, preparation method and application thereof

Synthesis of Nanoporous Flower-like Y-SAPO-11 Composite Molecular Sieves for Hydrocracking of n -Hexadecane