Abstract:The Ni0.5Zn0.5Fe2O4/SiO2 composite nanofibers were prepared using sol-gel process combined with electrospinning. The thermal decomposition and phase inversion process of precursor nanofibers and the effects of calcination temperature and SiO2 content on the phase composition, microstructure, morphology and magnetic property of the resulting nanofibers were studied by means of thermogravimetric and differential thermal analysis, X-ray diffraction, field emission scanning electron microscopy, high resolution transmission electron microscopy and vibrating sample magnetometer. The experimental results show that the cubic spinel structure is basically formed when the precursor nanofibers are calcined at 450 ℃ for 2 h. The average grain size of Ni0.5Zn0.5Fe2O4 contained in the composite nanofibers with 10 % SiO2 and their specific saturation magnetization and coercivity increase with increasing calcination temperature. Amorphous SiO2 additive can effectively restrain the growth of Ni0.5Zn0.5Fe2O4 nanocrystals. As a result, with SiO2 content increasing from 0 to 20 % , the average grain size of Ni0.5Zn0.5Fe2O4 in the prepared Ni0.5Zn0.5Fe2O4/SiO2 composite nanofibers calcined at 900 ℃ for 2 h decreases from 81.6 to 13.3 nm, and the specific saturation magnetization of these samples monotonically decreases, whereas the coercivity initially increases and then decreases due to the change of magnetic domain structure from multi-domain to single-domain along with the reduction in grain size. In addition, with the increase of SiO2 content, the diameter of the as-prepared Ni0.5Zn0.5Fe2O4/SiO2 composite nanofibers gradually increases and the surface becomes smooth.

Preparation of SiO2/(γ-Fe2O3-SiO2 ) Magnetic Catalyst Carrier

Preparation and characterization of TiO2/SiO2/gamma-Fe2O3-SiO2 magnetic photocatalyst

Preparation and characterization of SiO2 coated Fe3O4 nanoparticles

Preparation and characterization of core-shell γ-Fe2O 3@SiO2@Al2O3 magnetic catalyst

Preparation and Characterization of Core-Shell Γ-Fe<sub>2</sub>o<sub>3</sub>@sio<sub>2</sub>@ Al<sub>2</sub>O<sub>3</sub> Magnetic Catalyst

Preparation and Characterization of CoFe 2 O 4 /sio 2 Nanocomposites

Surface Modification of Fe3O4 Nano Particles and Its Applications in Preparation of Magnetic Alumina Catalyst Supports

Preparation of TiO2/SiO2 Composite by Chemical Coating Method

Preparation of Co0.5 Zn0.5 Fe2O4/SiO2 Magnetic Nanocomposites

Preparation and characterization of γ-Fe_2O_3/SiO_2 magnetic nanocomposites

Preparation and Characterization of Nano-magnetic Fe3O4-SiO2 Composite

Synthesis of Magnetic Carrier Sub-Microparticles with High Stability Through Carbon Reduction and Solation Coating Methods

Preparation and Property of Nano-Porous Fe3O4/SiO2 Composited Magnetic Microspheres by Supercritical Technique

Preparation and application of silica coated Fe_3O_4 magnetic nanoparticles

Preparation of Magnetic Fe3O4/SiO2 Nano-composite Particles by Chemical Deposition in Aqueous Solution

Preparation of CoFe2O4/SiO2 nanocomposites by sol–gel method

Preparation of Fe3O4@SiO2-Cu Composite Magnetic Nanoparticle and Study on Its Desulfurization Performance

Preparation of TiO<sub>2</sub>/SiO<sub>2</sub>/(γ-Fe<sub>2</sub>O<sub>3</sub>-SiO<sub>2</sub>) Magnetic Photocatalyst

Preparation and Characterization of Nanocomposite MgFe2O4/SiO2

Preparation of One-Dimensional Ni0.5 Zn0.5 Fe2O4/SiO2 Composite Nanostructures and Their Magnetic Properties

A Facile and Novel Approach to Magnetic Fe@SiO2and FeSi2@SiO2nanoparticles