Abstract:Thermally conductive adhesives (TCAs) have been widely used in electronic packaging industry, such as for chip packages in smart phones and high-power LED lightings, as they combine the workability of polymer resins with the high thermal conductivity of fillers([1-4]). The polymer resins endow adequate adhesion strength and provide sufficient mechanical robustness. The thermally conductive fillers mainly determine the capacity of heat dissipation; and the filler can be carbon nanotube, graphene, aluminum nitride, and metal, etc. Among the metallic filler materials, silver is regarded as a competitive TCA filler because of the superior thermal conductivity (similar to 400 W.m(-1).k(-1)) and resistance to oxidization. The interfacial resistance can be dramatically reduced when sintering behavior is occurred. Yet, it is still a great challenge to fabricate silver-based TCA samples at low temperature with a relatively high thermal conductivity since it is hard to sinter at a moderate temperature. In this work, a simple surface treatment of silver micro-flakes is applied. Laser flash apparatus results show that the out-of-plane thermal conductivity of 85 wt% TCAs achieve 22 W.m(-1).k(-1)when cured at 190 degrees C. The out-of-plane thermal conductivity of the TCA sample is ideal for applications in high-power thermal interface materials. It is notable that the surface treatment only simply includes two steps: hydrazine hydrate treatment and iodination treatment. A careful study on the influence factors such as surface treatment, curing temperature was conducted. The excellent heat conducting behavior renders the TCA with a good deal of future applications in high-power electron packaging.

Ultra-low Temperature Curable Conductive Silver Adhesive with different Resin Matrix

Effect of Diluent on Ultra-low Temperature Curable Conductive Silver Adhesive

Preparation and Performance of Epoxy Resin Conductive Adhesive with Fast-Curing Feature at Low Temperature

Preparation and characterization of Ag conductive adhesive with low resistivity

Adhesive Curing Through Low-Voltage Activation

Preparation of MXene and its application in low temperature electrically conductive adhesive

Copper Particles/epoxy Resin Thermosetting Conductive Adhesive Using Polyamide Resin As Curing Agent

Binder Chemistry for Ultra-Highly Conductive Pastes by Low Temperature Sintering of Silver Micro-Fillers

Development of UV-curing Anisotropically Conductive Adhesives

Preparation and characterization of low temperature curing conductive silver paste for screen printing

Preparation of silver nanopowders and its application in low temperature electrically conductive adhesive

Conductivity Enhancement of Polymer Composites Using High-Temperature Short-Time Treated Silver Fillers

Silver coated copper powder conductive adhesive and preparation method thereof

Microstructure Regulation and Fabrication of Epoxy-based Conductive Films with Excellent Electrical and Thermal Conductivity, Adhesion, Toughness, and Flexibility

Silver Pastes With Excellent Thermal Conductivity

Using Novel Materials to Enhance the Efficiency of Conductive Polymer

Cu-Ag Nanocomposite Pastes for Low Temperature Bonding and Flexible Interlayer-Interconnections

Surface Treatment of Micron Silver Flakes with Coupling Agents for High-Performance Electrically Conductive Adhesives

Preparation of Low Volatile Organic Compounds Silver Paste Containing Ternary Conductive Fillers and Optimization of Their Performances

Improvement in the Thermal Conductivity of Silver Epoxy Adhesive by Treating with Water Vapor