Abstract:Biopolymer aerogels are an emerging class of materials with potential applications in drug delivery, thermal insulation, separation, and filtration. Chitosan is of particular interest as a sustainable, biocompatible, and abundant raw material. Here, we present urea-modified chitosan aerogels with a high surface area and excellent thermal and mechanical properties. The irreversible gelation of an acidic chitosan solution is triggered by the thermal decomposition of urea at 80 °C through an increase in pH and, more importantly, the formation of abundant ureido terminal groups. The hydrogels are dried using either supercritical CO2 drying (SCD) or ambient pressure drying (APD) methods to elucidate the influence of the drying process on the final aerogel properties. The hydrogels are exchanged into ethanol prior to SCD, and into ethanol and then heptane prior to APD. The surface chemistry and microstructure are monitored by solid-state NMR and Fourier transform infrared spectroscopy, scanning electron microscopy, and nitrogen sorption. Surprisingly, large monolithic aerogel plates (70 × 70 mm2) can be produced by APD, albeit at a somewhat higher density (0.17-0.42 g/cm3). The as prepared aerogels have thermal conductivities of ∼24 and ∼31 mW/(m·K) and surface areas of 160-170 and 85-230 m2/g, for SCD and APD, respectively. For a primarily biopolymer-based material, these aerogels are exceptionally stable at elevated temperature (TGA) and char and self-extinguish after direct flame exposure. The urea-modified chitosan aerogels display superior mechanical properties compared to traditional silica aerogels, with no brittle rupture up to at least 80% strain, and depending on the chitosan concentration, relatively high E-moduli (1.0-11.6 MPa), and stress at 80% strain values (σ80 of 3.5-17.9 MPa). Remarkably, the aerogel monoliths can be shaped and machined with standard tools, for example, drilling and sawing. This first demonstration to produce monolithic and machinable, mesoporous aerogels from bio-sourced, renewable, and nontoxic precursors, combined with the potential for reduced production cost by means of simple APD, opens up new opportunities for biopolymer aerogel applications and marks an important step toward commercialization of biopolymer aerogels.

Synthesis of waterborne polyurethane aerogels-like materials via freeze-drying: an innovative approach

Exploring the Impact of the Synthesis Variables Involved in the Polyurethane Aerogels-like Materials Design

A Sustainable Freeze-Drying Route to Porous Polysaccharides with Tailored Hierarchical Meso- and Macroporosity.

Ultrasound-assisted freeze-drying process for polyimide aerogels

Carnauba Wax‐Assisted Preparation of Eco‐Friendly Aerogels by the Ambient Pressure Drying Method and their Applications for Photothermal Evaporation and Dye Wastewater Treatment

Robust and Highly Resilient Waterborne Polyurethane-Based Composite Aerogels Prepared by Blending with Aramid Nanofibers

Ultrasound‐assisted freeze‐drying strategy to enhance nanoparticle dispersion in aerogels: A case study on polyimide/silica nanocomposite aerogel

Fabrication and property of hydrophobic polyvinyl alcohol /clay aerogel via irradiation-crosslinking and ambient-drying

Role of freeze-drying in cellulose-based aerogels: Freezing optimization strategies and diverse water treatment applications

Double-cross-linking Strategy for Preparing Flexible, Robust, and Multifunctional Polyimide Aerogel

Preparation of ambient-dried multifunctional cellulose aerogel by freeze-linking technique

Vacuum-Dried Synthesis of Low-Density Hydrophobic Monolithic Bridged Silsesquioxane Aerogels for Oil/Water Separation: Effects of Acid Catalyst and Its Excellent Flexibility

Water-assisted synthesis of phenolic aerogel with superior compression and thermal insulation performance enabled by thick-united nano-structure

Polybenzoxazine aerogels fabricated by an aqueous solvent sol-gel method for thermal insulation

Strong, Machinable, and Insulating Chitosan-Urea Aerogels: Toward Ambient Pressure Drying of Biopolymer Aerogel Monoliths

Synthesis of Highly Cross-Linked Uniform Polyurea Aerogels

Hydrophobic Aerogels from Vinyl Polymers Derived from Radical Polymerization: Proof of Concept

Ambient drying to fabricate polybenzoxazine aerogels for thermal insulation in aerospace

Mechanical Performance and Thermal Stability of Polyvinyl Alcohol–cellulose Aerogels by Freeze Drying

Enhancing mechanical and thermal properties of polyvinyl alcohol/curdlan composite hydrogels and aerogels via freeze-casting technique

Synthesis of organic aerogels with tailorable morphology and strength by controlled solvent swelling following Hansen solubility