Abstract:Aerogel has been widely known as a low-density and highly porous material and is closely connected with the complex processing methods, such as freeze–drying or supercritical drying. In this work, using the polymerization-induced aramid nanofiber (PANF) as a building block, we put forward a modified freezing–drying method for the high-efficiency preparation of all-<i>para</i>-aromatic-amide aerogels. In the preparation process, PANF hydrogel is first frozen at −18 °C and then dried at 20–150 °C for the formation of PANF aerogel. The PANF framework formed during the freezing process is crucial for the formation of the PANF aerogel. Moreover, the space-occupying effect of ice crystals is also helpful for the formation of the macroscopic pore structure in the aerogel. Aerogels with large size or well-controlled shape could be successfully obtained by this method. Through the variation of PANF concentration in the hydrogel and drying temperature, aerogels with different densities (20–185 mg/cm<sup>3</sup>) could be achieved, and the lowest density is reached at 150 °C, with the PANF concentration of 0.7%. The low-density PANF aerogels show high specific compressive strengths and low thermal conductivities, which are comparable to those resulting from the freeze–drying or supercritical drying method. Furthermore, the shrinkage phenomenon in the drying process could be skillfully utilized for the preparation of PANF aerogel-coated objects. The PANF aerogels could be applied as a thermal insulating material or shock absorption material in practical applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.1c01551?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.1c01551</a>.Figure S1–S16: statistics of the diameter of PANFs; repeated filtering-dispersing process and PANF hydrogels with different PANF concentration; different products obtained from different methods; macroscopic state of PANF hydrogel and thawed PANF hydrogel before and after magnetic stirring; PANF hydrogel and the corresponding PANF aerogel in the shape of mooncake; preparation process of PANF aerogel-coated quartz tube; SEM images of different PANF aerogels at a low (×50) and high (×50000) magnification; high-temperature (150 °C) drying experiment for unfrozen and frozen PANF hydrogels with PANF% = 0.7%; specific strength of different PANF aerogel samples (ε = 70%); specific strength comparison of PA-20 and PA-40 with the low-density ANF-based aerogels (ε = 30%); compressive stress–strain curves of PA-20 at different strains for 100 compression–decompression cycles; surface of PANF aerogel before and after heating by infrared ray bulb; temperature variations of water in the metal tubes (with or without PANF aerogel insulation layer) after heating by infrared ray bulb; profiles of PANF aerogel and PU foam in the hot stage heating test; TGA and DTA curves of PANF aerogel and PU foam in air atmosphere; Tables S1–S3: stress retention and height recovery rates of PA-20 after 100 compression–decompression cycles at different strains; thermal conductivities of PANF aerogels and the already reported aramid aerogels; specific strengths (ε = 70%) and thermal conductivities of different kinds of aerogels (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c01551/suppl_file/nn1c01551_si_001.pdf">PDF</a>)Movie S1: Drop test of the PANF aerogel-coated quartz tube (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c01551/suppl_file/nn1c01551_si_002.avi">AVI</a>)This article has not yet been cited by other publications.

Robust and Highly Resilient Waterborne Polyurethane-Based Composite Aerogels Prepared by Blending with Aramid Nanofibers

Different Effects of Mixing Manners on the Porous Structures and Dense Films of Waterborne Polyurethane Modified with Recycled Aramid Nanofibers

Laminated aramid nanofiber aerogel reinforced epoxy resin composite

Macroscopic-Scale Preparation of Aramid Nanofiber Aerogel by Modified Freezing–Drying Method

Water-assisted synthesis of phenolic aerogel with superior compression and thermal insulation performance enabled by thick-united nano-structure

Polyimide-Coating-on-Aramid Nanofiber Strategy Toward Ultralight Organic Aerogels with Multifunctional Properties

Multi-functional Hydroxyapatite/polyvinyl Alcohol Composite Aerogels with Self-Cleaning, Superior Fire Resistance and Low Thermal Conductivity

Bio-Based Hydrogel and Aerogel Composites Prepared by Combining Cellulose Solutions and Waterborne Polyurethane

Preparation and flammability of poly(vinyl alcohol) composite aerogels.

Development of Light, Strong, and Water-Resistant PVA Composite Aerogels

Poly(vinyl Alcohol)/cellulose Nanofibril Hybrid Aerogels with an Aligned Microtubular Porous Structure and Their Composites with Polydimethylsiloxane.

Mechanically Strong and Thermally Responsive Cellulose Nanofibers/Poly(N-isopropylacrylamide) Composite Aerogels

Environmental-friendly and Fast Production of Ultra-Strong Phenolic Aerogel Composite with Superior Thermal Insulation and Ablative-Resistance

Highly Efficient Flame-Retardant and Enhanced PVA-Based Composite Aerogels through Interpenetrating Cross-Linking Networks

Rigid and Fire-Resistant All-Biomass Aerogels

Toward Record-High Stiffness in Polyurethane Nanocomposites Using Aramid Nanofibers

Mechanically strong and tough polyimide aerogels cross-linked with amine functionalized carbon nanotubes synthesized by fluorine displacement reaction

The Aramid-Coating-on-Aramid Strategy toward Strong, Tough, and Foldable Polymer Aerogel Films

Acoustic and Mechanical Characterization of a Novel Polypropylene Fibers Based Composite Aerogel

Ultra-high strength, highly deformable and superhydrophobic polybenzoxazine@cellulose nanofiber composite aerogel for thermal insulation

Aramid reinforced polyimide aerogel composites with high‐mechanical strength for thermal insulation material