Abstract:Silica aerogels have attracted widespread attention for their distinct nanoporous networks, composed of interconnected silica nanoparticles and high-volume nanosized pores. Nonetheless, producing silica aerogels with low costs and simple processes still remains a considerable challenge. Herein, the mesoporous silica aerogels were prepared from inorganic silicon source through the freeze-drying. Using sodium silicate as the silica precursor, the gel was formed by the ion exchange and sol-gel in sequence. The regeneration of the weak acidic ion exchange resin produced the sodium acetate solution, which can be potentially used as carbon source for sewage treatment. To eliminate the collapse of microstructure of the silica hydrogel during freeze-drying, the tert-butanol aqueous solution was used as the freeze-drying medium. Particularly, the direct mixing of tert-butanol and silica sol to generate wet gel avoids prolonged and material-consuming solvent replacement. The pore structure of mesoporous silica aerogel can be adjusted by changing the concentration of tert-butanol solution. The 18 wt% tert-butanol solution results in the most favorable mesoporous structure of silica aerogel, owing to the eutectic behavior within the gel, which was verified by differential scanning calorimetry (DSC) analysis, and also due to the superior and uniform mesoporous structure of wet gel, which was validated by the cryogenic scanning electron microscopy (cryo-SEM) observation. Under optimal process conditions, the obtained silica aerogel exhibited a high porosity (97.74%) and typical mesoporous structure with the large pore volume (4.84 cm3·g-1) and an average pore diameter of 24.40 nm. The proposed cost-effective preparation strategy could elevate the potentials for large scale applications of silica aerogels in the fields of thermal insulation for building, industrial catalysis and adsorption, etc.

A Sustainable Freeze-Drying Route to Porous Polysaccharides with Tailored Hierarchical Meso- and Macroporosity.

Macroporous Hydrogels Prepared by Ice Templating:Developments and Challenges

Synthesis and characterization of biodegradable macroporous cryogels crosslinked by chitosan oligosaccharide-graft-acrylic acid

Preparation of Poly(ethylene Glycol) Aligned Porous Cryogels Using a Unidirectional Freezing Technique

Preparation of ambient-dried multifunctional cellulose aerogel by freeze-linking technique

Role of freeze-drying in cellulose-based aerogels: Freezing optimization strategies and diverse water treatment applications

Pectin Nanoporous Structures Prepared via Salt-Induced Phase Separation and Ambient Azeotropic Evaporation Processes

A Facile Strategy for Freeze-Drying Preparation of Silica Aerogel from Sodium Silicate

A Novel Freeze-Drying-Free Strategy to Fabricate a Biobased Tough Aerogel for Separation of Oil/Water Mixtures

Porous Starch Materials via Supercritical- and Freeze-Drying

Carnauba Wax‐Assisted Preparation of Eco‐Friendly Aerogels by the Ambient Pressure Drying Method and their Applications for Photothermal Evaporation and Dye Wastewater Treatment

Review on the Production of Polysaccharide Aerogel Particles

Anisotropic nanocellulose aerogels with ordered structures fabricated by directional freeze-drying for fast liquid transport

Synthesis of waterborne polyurethane aerogels-like materials via freeze-drying: an innovative approach

Fabrication of nano-cellulose aerogels by freeze drying using tert-butyl alcohol as displacement solvent

Polysaccharide-Based Aerogel Bead Production via Jet Cutting Method

Synthesis of organic aerogels with tailorable morphology and strength by controlled solvent swelling following Hansen solubility

Green Approach to Facilely Design Hydrophobic Aerogel Directly from Bagasse

Ultrasound-assisted freeze-drying process for polyimide aerogels

Upcycling orange waste biomass into bio-aerogels

Preparation and Investigation of High Surface Area Aerogels from Crosslinked Polypropylenes