Abstract:Organic aerogels represent an interesting new class of materials and as the basis for the generation of new carbonaceous materials, both finding application in catalytic and adsorbent technology.(1) These are prepared via the synthesis of an aqueous colloidal gel composed Of Suitable precursors. The gel state is generated by the formation of new chemical (i.e. polymerisation), and physical (i.e. hydrogen bonding) bonds, as ageing proceeds. The colloidal gel has a well-developed micro- and mesoporosity as well as large surface area. By fine-tuning the synthesis conditions, the pore architectures may be controlled. The solvent is subsequently removed to yield the aerogel, via extraction by supercritical fluids. For that CO2 is a rational choice as its critical point can be easily reached, and offers a wide range of temperatures and pressures, facilitating another dimension in material property control. The most commonly used precursors to generate the gel state are formaldehyde and resorcinol or its derivatives(2), but may also be prepared from the aqueous gelation and self-assembly of biomass derived polysaccharides.The transformation of organic aerogels via a controlled non-oxidative pyrolysis step, to produce low-density carbons is of increasing interest as the advantages of these materials become more evident. Carbon aerogels are chemically and mechanically more stable than the organic predecessor, provide excellent conductivity, and can be employed at high temperatures and pH. Control of carbon aerogel textural and surface properties is possible by selection of different organic precursors and careful selection of thermal treatment parameters. Interestingly, polysaccharide xerogels and aerogels may also be transformed into like carbons. which are termed Starbons (R)(3).Because of close relationship between certain organic and carbon aerogels in this chapter attention will be given to both. A detailed introduction to the synthesis and processing, characterisation and application of organic and carbon aerogels will be presented. The physical and chemical characteristics of these materials will be discussed in detail, with particular regard to density, specific surface area and porosity. Applications of aerogels will also be introduced, with a particularly accent on their use as heterogeneous catalyst supports. Future prospects for this exciting class of materials will also be proposed.

Preparation and Investigation of High Surface Area Aerogels from Crosslinked Polypropylenes

Powdery Polymer and Carbon Aerogels with High Surface Areas for High-Performance Solid Phase Microextraction Coatings.

Low-density, high-strength and large-scaled monolithic carbon aerogels fabricated via modified ambient pressure drying

Chemical Foaming Coupled Self-Etching: A Multiscale Processing Strategy for Ultrahigh-Surface-Area Carbon Aerogels.

Organic Aerogels As Precursors For The Preparation Of Porous Carbons

Fabrication of Cross-Linked Polysulfone Aerogels for Thermal Insulation

Fabrication of novel powdery carbon aerogels with high surface areas for superior energy storage

Hierarchically porous and highly transparent polymethylsilsesquioxane aerogels with an ultrahigh specific surface area using an organic alkali as a catalyst, surfactant, and template

A Novel Aerogel with Forced Thermoelastic Deformation

Nanofibrous, Hypercrosslinked Polymers with Multiscale Pores Through Post-Crosslinking of Emulsion-Templated Syndiotactic Polystyrene Aerogels

Preparation and Characterization of Polyimide Aerogels with a Uniform Nanoporous Framework

Polyimide Aerogels Crosslinked Through Cyclic Ladder‐like and Cage Polyamine Functionalized Polysilsesquioxanes

Strong, Machinable, and Insulating Chitosan-Urea Aerogels: Toward Ambient Pressure Drying of Biopolymer Aerogel Monoliths

Synthesis of High-Surface-Area Alumina Aerogels without the Use of Alkoxide Precursors

Preparation of superhydrophobic and flexible polysiloxane aerogel

Preparation and Application of Carbon Aerogels

Advances in Polymer Aerogels

High-mechanical-strength polyimide aerogels crosslinked with 4, 4′-oxydianiline-functionalized carbon nanotubes

Preparation of Low Density and High Mesoporosity Carbon Aerogels by an Organic/inorganic Hybrid Method

Polyimide-Coating-on-Aramid Nanofiber Strategy Toward Ultralight Organic Aerogels with Multifunctional Properties

Monolithic Dynamic Covalent Polymer Aerogels Via Ambient Pressure Drying with Super-Flexibility, Weldability, Closed-Loop Recyclability, and Multifunctionality