Abstract:Polyimide (PI) aerogels are the great candidates for sound absorption, thermal insulation and mechanical cushioning materials due to their low density, excellent mechanical properties and good thermal stability. However, the high shrinkage and hydrophilicity of PI aerogels, as well as the time-consuming and complexity of the process directly limit their wide application in many fields. Herein, a facile one-step method for the synthesis of porous monolithic poly(urethane-imide) (PUI) aerogels was successfully developed. Hydrothermal synthesis and ambient drying methods were adopted in the construction of monolithic chemically cross-linked PUI aerogels, which avoids the complex imidization process. PUI aerogels were homogeneously produced by a chemical cross-linking copolymerization reaction between polyurethane (PU) oligomers, Benzene-1,2,4,5-tetracarboxylic dianhydride (PMDA) and 1, 3, 5-tris (6-isocyanatohexyl)-1, 3, 5-triazine-2, 4, 6(1H, 3H, 5H)-trione without any catalysts. Interestingly, the introduction of linear flexible PU oligomers chain segments effectively prevented the shrinkage of the network backbone and enhanced the hydrophobicity of PUI aerogels. The obtained PUI aerogels have low density (0.196 g/cm 3 ), low shrinkage (9.30%), high porosity (79.54%) and hydrophobicity (water contact angle of 129.2°). Under high pressure, PUI aerogel was compressed but not break and the compression Young's modulus as high as 3.638 MPa. Moreover, the thermal conductivity of PUI aerogels was only 59.92 mW/m/K at 150 °C. When the back cavity depth was 5 mm, the highest sound absorption coefficient of PUI aerogel was up to 0.7219. This work provides a new method for the development of lightweight, high-mechanical-strength polymer aerogels, and the prepared aerogels have a potential application in the field of multifunctional integrated sound absorption materials.

Synthesis of Highly Cross-Linked Uniform Polyurea Aerogels

Mechanically robust poly(urethane-imide) aerogels with excellent thermal insulation and sound absorption by ambient drying

Double-cross-linked aerogels towards ultrahigh mechanical properties and thermal insulation at extreme environment

Exploring the Impact of the Synthesis Variables Involved in the Polyurethane Aerogels-like Materials Design

Millimeter-Size Spherical Polyurea Aerogel Beads with Narrow Size Distribution

Polyurea Aerogels: Synthesis, Material Properties, and Applications

Advances in Polymer Aerogels

Fabrication and Characterization of a High-Strength Polyimide/Thermoplastic Polyurethane Composite Aerogel with Hydrophobicity and Low Thermal Conductivity

Influence of Silica-Aerogel on Mechanical Characteristics of Polyurethane-Based Composites: Thermal Conductivity and Strength

Mechanically strong, thermal-insulated, and ultralow dielectric polyimide aerogels with adjustable crosslinking methods

Water-assisted synthesis of phenolic aerogel with superior compression and thermal insulation performance enabled by thick-united nano-structure

Ultrasound‐assisted freeze‐drying strategy to enhance nanoparticle dispersion in aerogels: A case study on polyimide/silica nanocomposite aerogel

Polybenzoxazine Aerogels for Thermal Protection at Extremely High-Temperature/Cryogenic Conditions

Ultralight and heat-insulating mesoporous polyimide aerogels cross-linked with aminated SiO2 nanoparticles

Enhancement of Mechanical and Thermal Characteristics of Polyurethane-Based Composite with Silica Aerogel

Reversible sacrificial hydrogen bonds enhanced ultra-high strength polybenzoxazine aerogel for thermal insulation

Fabrication and Characterization of Thermally Insulating Polyurethane-Silica Aerogel Composite for Cryogenic Application

Polybenzoxazine aerogels fabricated by an aqueous solvent sol-gel method for thermal insulation

Ultrahigh-strength silicone aerogels reinforced by an armor-like epoxy framework via a temperature-controlled sequential reaction strategy

Preparation and Characterization of Polyimide Aerogels with a Uniform Nanoporous Framework

Cross-Linked Polyimide Aerogels with Excellent Thermal and Mechanical Properties