Abstract:To optimise the benefits of the deep-rolling process in the service life context of treated components, the process application must be investigated. In addition to the reduction in surface roughness and near-surface material strengthening, compressive residual stresses are introduced, which are primarily responsible for the increase in service life for components, especially in the case of high-strength steel materials. A numerical parameter sensitivity analysis is performed in order to investigate the introduced residual stresses in detail. For this purpose, a validated deep-rolling simulation model is used, which replicates the deep rolling of a railway axle made of the high-strength steel material 34CrNiMo6. The model is based on an elastic-plastic Chaboche material model parameterised on uniaxial tensile and LCF test results and validated with residual stress measurements. Using this model as a basis, the effect of the main process parameters deep-rolling force, feed rate, friction coefficient, number of overruns, tool geometry, and shaft geometry on the resulting residual stress state are investigated. The results reveal that the deep-rolling force has the most significant influence on the introduced residual stress state and should therefore be highlighted. In the case of applying a deep-rolling force of more than 10 kN, maximum compressive residual stresses of around − 1000 MPa are introduced, and a strong saturating behaviour is shown. Maximum compensating tensile residual stresses of + 100 MPa occur below the surface. The main influence of the deep-rolling force is the effective depth achieved, which is determined by the depth of the zero crossing. This varies from 1 mm with an applied force of 2 kN to more than 3.5 mm with 20 kN. Furthermore, the results are analysed to conclude suggestions for the process's applicability, and a proposal for an optimised deep-rolling treatment is presented. There multiple deep rolling with decreased deep-rolling forces is used to achieve a comparably optimised residual stress state. In summary, with the presented results, a contribution to a deeper understanding of the deep-rolling process can be achieved; the influence of the most important process parameters on the residual stress in-depth profiles is established; an optimisation proposal is presented; and correlations are found. Thus, the base work for further fatigue strength assessments and the optimisation of the deep-rolling process regarding the increase of service is laid.

Process Variable Optimization for Hot-Profiled Rolling of SAE 52100 Steel

Deep Rolling Techniques: A Comprehensive Review of Process Parameters and Impacts on the Material Properties of Commercial Steels

Numerical parameter sensitivity analysis of residual stresses induced by deep rolling for a 34CrNiMo6 steel railway axle

Modelling of the Rolling Process of Titanium Alloy Tube Billets in Laboratory Conditions on a RSP 14-40 Rolling Mill

Future Research Potentials of Hot Rolling Process: A Review

Numerical Simulation as a Tool for the Study, Development, and Optimization of Rolling Processes: A Review

Analytical and Finite Element Analysis of the Rolling Force for the Three-Roller Cylindrical Bending Process

Optimizing the Rolling Process of Lightweight Materials

The Optimal Design for the Production of Hot Rolled Strip with “tight Oxide Scale” by Using Multi-objective Optimization

Optimization of Metal Rolling Control Using Soft Computing Approaches: A Review

Adaptive Pass Scheduling for Roughness Control in Cold Rolling

Damage Initiation of 15V38 Steel Bar during Square‐to‐Round Hot Rolling Process

Predictive Modeling and Optimization of Hot Forging Parameters for AISI 1045 Ball Joints Using Taguchi Methodology and Finite Element Analysis

Influence of rolling force optimization on thickness accuracy of 20-high cold-rolling mill of silicon steel

Multi-objective optimization of parametric design for profile ring rolling process based on residual stress control

Evaluation Methods and Coupled Optimization at Macro- and Micro-Scales for Profiled Ring Rolling of Inconel718 Alloy

Application of GRA method for multi-objective optimization of roller burnishing process parameters using a carbide tool on high carbon steel (AISI-1040)

Data-Driven Multi-Objective Optimization of Power Consumption and Quality for Finishing Rolling Process

The optimization of accuracy and efficiency for multistage precision grinding process with an improved particle swarm optimization algorithm

Dynamic Recrystallization Behavior of Low‐Carbon Steel during the Flexible Rolling Process: Modeling and Characterization

Finite Element Modeling of Hot Rolling of 1075 Carbon Steel Process with Variable Cross Section