Abstract:Hot rolling of steels represents one of the most critical steps to achieve finished products with high surface quality. The increasing productivity added to the rising customer requirements result in more and more severe scheduling rules for the HSM. Strip surface aspect is very important in terms of HSM operation costs and productivity limitation. Among all surface defects, the most crippling comes from the oxide scale formed at the surface of the steel during the hot rolling, at the entry of the finishing mill (last part of the hot strip mill): the secondary scale, mechanical behaviour of which is still poorly known. The secondary scale may fracture under the stresses imposed by the successive rolling passes, and can be embedded in the steel strip surface: this defect is called "rolled-in scale defect". In addition, the extrusion of the subjacent metal inside the oxide cracks induces large local modifications of friction and heat transfer conditions. Consequently, a precise description of oxide scale deformation mechanisms is necessary to better define the boundary conditions in a roll bite and to better understand the initiation mechanisms of rolled-in scale defects. Our scientific objective is then to provide a realistic physical and numerical model to simulate the oxide scale flow in the roll bite and in particular, its damage. After the presentation of the industrial process and the context of this study, the physical and mechanical properties of the oxide scale in the finishing mill are investigated. We introduce the Forge2® finite element software, selected for this study to simulate the oxide scale behaviour in a finishing mill stand. The numerical developments performed to simulate the different kinds of oxide damage are described. Three mechanical tests have been selected to approach the solicitations undergone by the oxide scale at the entry of the roll gap, suspected to be critical for damage: the 4-point hot bending test, the hot tension test and the hot plane strain compression test. A numerical study is performed in parallel. Based on constitutive data obtained from these three mechanical tests, the mechanical description of a rolling stand is sufficient for satisfactory simulation of the industrial process.

Damage Initiation of 15V38 Steel Bar during Square‐to‐Round Hot Rolling Process

Experimental study on the surface defects of materials in bar rolling with a processing map applicable to billet-to-oval groove rolling

Numerical Evaluation of a High Speed Steel Work Roll During Hot Strip Rolling Process

Experimental Development of Johnson–Cook Strength Model for Different Carbon Steel Grades and Application for Single‐Pass Hot Rolling

Material Modeling of Hot-Rolled Steel Sheet Considering Differential Hardening and Hole Expansion Simulation

Meso-mechanical Analysis of Fracture Process of Anisotropic Ductile Damage in Hot-Rolled Steel

Experimental study and numerical simulation of iron oxide scales mechanical behavior in hot rolling

Comparison of Two Uncoupled Ductile Damage Initiation Models Applied to DP900 Steel Sheet under Various Loading Paths

Modeling of the ductile damage – Application for bar shearing

Analytic Numerical Modeling for Thermal Mechanical Processing of Plate under Rolling

Effectiveness of thermoviscoplastic material models in predicting the thermomechanical behavior of rolled homogenous armor steel

Process Variable Optimization for Hot-Profiled Rolling of SAE 52100 Steel

The effect of the increased strain per pass during the hot-rolling and its effect on the tensile properties of V-Mo and Cr-V-Mo microalloyed dual-phase steels

An Experimental Study of the Thermal State of a Steel Billet during Hot Rolling

FEM simulation of thermo-mechanical stress and thermal fatigue life assessment of high-speed steel work rolls during hot strip rolling process

Effect of Rolling Process Parameters on Transverse Cracks on the Surface of Q345 Steel

A dynamic composite rolling model based on Lemaitre damage theory

Modelling of the Rolling Process of Titanium Alloy Tube Billets in Laboratory Conditions on a RSP 14-40 Rolling Mill

Numerical analysis of Johnson-Cook damage model parameters effects on the cutting simulation of AISI 1045

Research on dynamic deformation behavior and constitutive relationship of hot forming high strength steel

Numerical analysis of the load paths and the resulting damage evolution during deep drawing of dual-phase steel