Abstract:Hot rolling of steels represents one of the most critical steps to achieve finished products with high surface quality. The increasing productivity added to the rising customer requirements result in more and more severe scheduling rules for the HSM. Strip surface aspect is very important in terms of HSM operation costs and productivity limitation. Among all surface defects, the most crippling comes from the oxide scale formed at the surface of the steel during the hot rolling, at the entry of the finishing mill (last part of the hot strip mill): the secondary scale, mechanical behaviour of which is still poorly known. The secondary scale may fracture under the stresses imposed by the successive rolling passes, and can be embedded in the steel strip surface: this defect is called "rolled-in scale defect". In addition, the extrusion of the subjacent metal inside the oxide cracks induces large local modifications of friction and heat transfer conditions. Consequently, a precise description of oxide scale deformation mechanisms is necessary to better define the boundary conditions in a roll bite and to better understand the initiation mechanisms of rolled-in scale defects. Our scientific objective is then to provide a realistic physical and numerical model to simulate the oxide scale flow in the roll bite and in particular, its damage. After the presentation of the industrial process and the context of this study, the physical and mechanical properties of the oxide scale in the finishing mill are investigated. We introduce the Forge2® finite element software, selected for this study to simulate the oxide scale behaviour in a finishing mill stand. The numerical developments performed to simulate the different kinds of oxide damage are described. Three mechanical tests have been selected to approach the solicitations undergone by the oxide scale at the entry of the roll gap, suspected to be critical for damage: the 4-point hot bending test, the hot tension test and the hot plane strain compression test. A numerical study is performed in parallel. Based on constitutive data obtained from these three mechanical tests, the mechanical description of a rolling stand is sufficient for satisfactory simulation of the industrial process.

Future Research Potentials of Hot Rolling Process: A Review

Deep Rolling Techniques: A Comprehensive Review of Process Parameters and Impacts on the Material Properties of Commercial Steels

Hot Rolling of HSLA Steels – a Review of Recent Studies

Process Variable Optimization for Hot-Profiled Rolling of SAE 52100 Steel

Effect of Warm Rolling Process Parameters on Microstructure and Mechanical Properties of Structural Steels

Numerical Simulation as a Tool for the Study, Development, and Optimization of Rolling Processes: A Review

Optimization of Metal Rolling Control Using Soft Computing Approaches: A Review

A Review of Current State and Prospect of the Manufacturing and Application of Advanced Hot Stamping Automobile Steels

Influence of process conditions and pore morphology on the closure rate of pores in hot rolling of steel

A review of planning and scheduling methods for hot rolling mills in steel production

An Experimental Study of the Thermal State of a Steel Billet during Hot Rolling

Steel development. Review and prospects for the future

Effect of Hot Rolling Process on Microstructure and Properties of Low-Carbon Al-Killed Steels Produced Through TSCR Technology

Representative Technologies for Hot Charging and Direct Rolling in Global Steel Industry

Damage Initiation of 15V38 Steel Bar during Square‐to‐Round Hot Rolling Process

Experimental study and numerical simulation of iron oxide scales mechanical behavior in hot rolling

The influence of process parameters on the mechanical properties of hot rolling dual phase heavy steel plate

Friction Stir Processing on the Tribological, Corrosion, and Erosion Properties of Steel: A Review

A Study on Microstructure, Texture and Precipitation Evolution at Different Stages of Steel Processing in Interstitial Free High Strength Steels

Experimental and FE analysis of void closure in hot rolling of stainless steel