Air-Side Heat Transfer and Friction Characteristics of Fin-and-Tube Heat Exchangers with Various Fin Types
L. B. Wang,M. Zeng,L. H. Tang,Q. W. Wang
DOI: https://doi.org/10.2495/978-1-84564-818-3/07
2013-01-01
Abstract:Tube bank fi n heat exchangers have widespread applications, they are transferring enormous amounts of energy, and also consuming very large amount of mechanical energy. Because the dominant thermal resistance in such heat exchangers is usually on the air side in practical applications, and therefore the use of the fi n surfaces on the air side is very common to effectively improve their overall thermal performance. Energy costs and environmental considerations continue to motivate attempts to derive better performance over the existing designs. As a result, during the past few years, there are also many investigations to the slit fi n pattern and to the longitudinal vortex generator fi ns. Because it involves a huge cost and a strenuous work to compare the heat transfer performances of these fi n patterns, up to now there are no enough data to summarize the comparisons thoroughly. However, there are a few reported results now available to make a brief summary on the airside performances of the various fi n patterns with aims to provide information for some readers to utilize the available data, to fithe work need to be done further, and fi nd out new fi n pattern having good heat transfer performance. Therefore, in this chapter the heat transfer performances of fifi n patterns of circular tube bank fi n heat exchangers are compared. In addition, the heat transfer performances of three fi n patterns of fl at tube bank fi n heat exchangers are also compared. Three sets of criteria, namely, the identical mass fl ow rate, pressure drop, and the identical pumping power, are used in judging. The results show that for the circular tube bank fi n heat exchangers, with the Reynolds number ranging from 4,000 to 10,000,