Abstract:An apparatus for transferring thermal energy across an impermeable barrier between two or more fluids is a heat exchanger. The effective transmission of heat from a hot fluid to a cold fluid is its primary goal. The temperature differential between the two fluids directly affects this heat transfer. Using CFD study with FLUENT 2020 R1, the performance characteristics of the compact plate fin heat exchanger's improved surfaces are examined. The simulation of heat transfer and flow encompassed a variety of velocities including completely turbulent regions. The pressure, temperature, and velocity contours were taken from the Fluent simulations. To determine the heat exchanger's flow and heat transfer performance, numerical analysis has been done. Since boundary conditions are crucial to CFD, they have been carefully chosen. The flow field, heat transfer, thickness, and wavelength were all predicted using the software code for a range of air to water velocities. Three distinct wavelengths of numerical simulations for a plate-fin heat exchanger were used in the study (10, 20, and 30). There were changes to the fin thickness, entry locations, and air and water entry velocities. Solid Works and Ansys were used to create the geometry for the three-level fin models that were placed inside the heat exchanger, both with and without a cover. For determining the heat exchanger's geometry and fin isometry, three levels measuring 19.6 mm in height and 53.64 mm in width were constructed. The fins have a thickness of 0.2 to 0.4 mm. As the air and water velocities vary, so does the temperature inside the heat exchanger. Because the topmost layer is a warm stream's flow channel, the temperature rises there, whereas the opposite effect is seen close to the bottom layer. Convection heat transmission to the surroundings and conduction heat transfer through the heat exchanger's side plates are the causes of fluid temperature fluctuations in the depth direction.

Heat Transfer and Pressure Loss in Small Commercial Shell-and-Finned-Tube Heat Exchangers

Airside Heat Transfer and Pressure Loss Characteristics of Bare and Finned Tube Heat Exchangers Used for Aero Engine Cooling Considering Variable Air Properties

Numerical Investigation Of Effect Of Tube Shape On Air-Side Heat Transfer And Pressure Drop Characteristics Of A Finned Tube Heat Exchanger

Heat-Transfer and Flow-Friction Characteristics of Some Compact Heat-Exchanger Surfaces: Part 3—Design Data for Five Surfaces

Heat Transfer and Pressure Drop in Plate Fin Heat Exchangers: A Numerical Approach

EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER AND PRESSURE DROP FOR FIN-AND-TUBE HEAT EXCHANGERS WITH LARGE-ROW AND LARGE-DIAMETER TUBES

Numerical Simulation of Heat Transfer Characteristics of Finned Tube Heat Exchanger at Different Flow Velocities

Thermal analysis, pressure drop and exergy loss of energy efficient shell, and triple meshed helical coil tube heat exchanger

Experimental Investigation of Heat Transfer and Pressure Drop Characteristics of H-type Finned Tube Banks

Design, Fabrication and Performance Evaluation of a Shell and Tube Heat Exchanger for Practical Application

Progress in Design Calculations of Shell-and-tube Heat Exchangers

Heat-Transfer and Flow-Friction Characteristics of Some Compact Heat-Exchanger Surfaces: Part 2—Design Data for Thirteen Surfaces

Heat Transfer and Fouling Performance of Finned Tube Heat Exchangers: Experimentation Via on Line Monitoring

Numerical studies on heat transfer and pressure drop characteristics of flat finned tube bundles with various fin materials

Thermodynamic and hydraulic design characteristics of the fin tube heat exchanger

Heat Transfer and Pressure Loss In Combined Tube Banks With Triple-Finned Tubes

Thermal-Hydraulic Characterization of Shell-Side Flow in a Cryogenic Coiled Finned-Tube Heat Exchanger

Heat-Transfer and Flow-Friction Characteristics of Some Compact Heat-Exchanger Surfaces: Part 1—Test System and Procedure

Numerical investigation on effects of using segmented and helical tube fins on thermal performance and efficiency of a shell and tube heat exchanger

A Comparative Study Of Fin-And-Tube Heat Exchangers With Various Fin Patterns

Experimental and numerical investigations of local flow and heat transfer characteristics of partially finned flat-oval tubes