Abstract:An apparatus for transferring thermal energy across an impermeable barrier between two or more fluids is a heat exchanger. The effective transmission of heat from a hot fluid to a cold fluid is its primary goal. The temperature differential between the two fluids directly affects this heat transfer. Using CFD study with FLUENT 2020 R1, the performance characteristics of the compact plate fin heat exchanger's improved surfaces are examined. The simulation of heat transfer and flow encompassed a variety of velocities including completely turbulent regions. The pressure, temperature, and velocity contours were taken from the Fluent simulations. To determine the heat exchanger's flow and heat transfer performance, numerical analysis has been done. Since boundary conditions are crucial to CFD, they have been carefully chosen. The flow field, heat transfer, thickness, and wavelength were all predicted using the software code for a range of air to water velocities. Three distinct wavelengths of numerical simulations for a plate-fin heat exchanger were used in the study (10, 20, and 30). There were changes to the fin thickness, entry locations, and air and water entry velocities. Solid Works and Ansys were used to create the geometry for the three-level fin models that were placed inside the heat exchanger, both with and without a cover. For determining the heat exchanger's geometry and fin isometry, three levels measuring 19.6 mm in height and 53.64 mm in width were constructed. The fins have a thickness of 0.2 to 0.4 mm. As the air and water velocities vary, so does the temperature inside the heat exchanger. Because the topmost layer is a warm stream's flow channel, the temperature rises there, whereas the opposite effect is seen close to the bottom layer. Convection heat transmission to the surroundings and conduction heat transfer through the heat exchanger's side plates are the causes of fluid temperature fluctuations in the depth direction.

High Precision Test Installation of Heat Transfer and Flow Resistance of Heat Exchangers

Design of Temperature Testing System in Multi-Parameter Combined Environmental Test

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

Simulation, Experimentation, and Collaborative Analysis of Adjacent Heat Exchange Modules in a Vehicular Cooling System

Thermal Performance Testing Device of Automobile Air Conditioning Heat Exchangers for Production Process Quality Control with Application

Design of a Thermal Performance Test Equipment for a High-Temperature and High-Pressure Heat Exchanger in an Aero-Engine

Comparison of Temperature Difference Measurement Technologies Used in Vehicular Heat Exchangers

A Test Bench For Vacuum Heat And Mass Transfer Processes

Software Development for Heat Power Design of Combined Plate-Fin Heat Exchangers

Design And Optimization Of Temperature Acquisition System For Determination Of Effective Thermal Conductivity Of Pebble Bed

Heat Transfer and Pressure Drop in Plate Fin Heat Exchangers: A Numerical Approach

Testing And Analyzing On Once-Through Water Performance Of Single Pipe Solid-Liquid Fluidized Bed Heat Exchanger

Heat-Transfer and Flow-Friction Characteristics of Some Compact Heat-Exchanger Surfaces: Part 1—Test System and Procedure

Experimental Investigation on Flow and Heat Transfer Performance of a Novel Heat Fin-Plate Radiator for Electronic Cooling

A computational fluid dynamics study by conjugate heat transfer in OpenFOAM: A liquid cooling concept for high power electronics

Distributed Optical Measurement System for Plate Fin Heat Exchanger

An experimental study of the influence of the temperature difference field uniformity on cross-flow heat exchanger performance

Theoretical and experimental study on a novel evaluation criteria of heat exchangers applied in aero engines

Numerical and Experimental Study on the Flow and Heat Transfer Performance of a Plate-Fin Heat Exchanger Using for Environmental Protection

A Study on the Effect of Installation Parameters on the Performance of Heat Exchangers by Wind Tunnel Testing

Simulation of Fin-and-tube Heat Exchanger Based on Two-phase Fluid Network