Abstract:The pebble-bed high-temperature gas-cooled reactor (HTGR) is an advanced nuclear system with inherent safety. The nuclear reactor is operated in high-temperature ranges and its design temperature limit is 1600 °C. It is important to discuss the conduction–radiation heat transfer in the nuclear pebble bed during the thermal hydraulics analysis. Until now, the investigation mainly focuses on large-scale experimental tests, such as the Selbsttätige Abfuhr der Nachwärme (SANA) test by the International Atomic Energy Agency (IAEA), high temperature test unit (HTTU) under low gas pressure by North-West University of South Africa, and the pebble bed equivalent conductivity measurement (PBEC) under vacuum conditions for the high temperature gas-cooled reactor pebble bed module (HTR-PM) project by the Institute of Nuclear and New Energy Technology (INET) of Tsinghua University. In this work, a thermal resistance model was developed to calculate the conduction–radiation effective thermal conductivity of nuclear pebble beds. With the constitutive continuum modeling for conduction, contact resistance, coordination number, and void fraction are considered for physical expressions, and heat conduction in the packed bed will be enhanced directly by higher packing density and more contact. For thermal radiation dominated by the heat transfer process under high temperatures, a sub-cell model with an equivalent resistance network is developed to calculate the radiative exchange factor, and the void fraction effect is implemented by a modification term with thermal ray tracing results. At low packing density, because the thermal rays from the local pebble will travel a further distance until reaching the surrounding pebbles, the local sphere will be in contact with more particles by thermal radiation, and the heat transfer is enhanced. Compared with the empirical correlations, the present model is proven to be applicable for both dense and dilute cases. In the nuclear pebble bed, the present conduction–thermal radiation model agrees generally with experimental data under different temperatures and can be applied in the particle-scale CFD-DEM simulations. The present work provides a meaningful approach for conduction–thermal radiation heat transfer for engineering and nuclear pebble-bed design.

Design And Optimization Of Temperature Acquisition System For Determination Of Effective Thermal Conductivity Of Pebble Bed

Design of Temperature Testing System in Multi-Parameter Combined Environmental Test

Modeling of the Heat Transfer Characteristics of the Effective Thermal Conductivity Test Facility for High Temperature Gas-Cooled Reactors

Heating system design and validation for the pebble bed effective thermal conductivity experiment in a high temperature gas cooled reactor

Theoretical Analysis of Effective Thermal Conductivity for the Chinese HTR-PM Heat Transfer Test Facility

Cutting Temperature and Force Data Acquisition and Measuring System Design in High Speed Machining

BUILDING OF ENDOTHERMIC FUEL COOLING SIMULATION SYSTEM

Dynamical Temperature Monitoring System Design for High-speed Cutting Based on Thin-film Thermocouples

Design of a Multichannel Dynamic Temperature Measurement System for Developing Thermal Management System of New Energy Vehicles

Method and Validation for Measurement of Effective Thermal Diffusivity and Conductivity of Pebble Bed in High Temperature Gas-cooled Reactors

Design of the Essential Material Test Equipment for the Pebble Bed Effective Thermal Conductivity Measurement Experiment

Data processing method for effective thermal diffusivity experiment of pebble bed in high temperature gas cooled reactors

Temperature Measuring System in High Temperature Carbon Reducing Environment

Integrated Parameter Mapping and Real-Time Optimization for Load Changes in High Temperature Gas-Cooled Pebble Bed Reactors

Modeling and Analysis of Dynamic Heat Transfer Characterization of Environment Simulating Facility for High Temperature Gas-cooled Reactor

Porous Structure Analysis of the Packed Beds in A High-Temperature Reactor Pebble Bed Modules Heat Transfer Test Facility

Dynamic simulation and optimization of load change operation of high-temperature gas-cooled reactor pebble-bed module

Investigation of convective heat transfer in a cold flow pebble bed nuclear reactor using advanced non-invasive pebble probe heat transfer sensor

A Thermal Resistance Model of Conduction–thermal Radiation Heat Transfer in Pebble-Bed Nuclear Reactors

Study on On-Line Temperature Measurement Technology for Core of Pebble Bed High Temperature Gas-Cooled Reactor

Comparison of Several Thermal Conductivity Constants for Thermal Hydraulic Calculation of Pebble Bed Reactor