Abstract:This study investigates the impact of thermomechanical processing route on the microstructural evolution, and mechanical properties (tensile strength, hardness and elastic plastic (J 1c ) fracture toughness) of the 7075-aluminum alloy. As received 7075 Al Alloy underwent for the solution heat treatment (SHT) followed by artificial aging and cold rolling (CR) process, respectively. Generally, it was observed that cold rolling of 7075 Al alloy is very challenging, but in this work 90 % cold rolling successfully achieved by optimizing the thermo-mechanical process. The novel heat treatment process for achieving the 90 % cold rolling reduction as follow: firstly, SHT was performed at 470°C for 8 hours(h), there after aging at 140°C for 21 h was performed. Characterization techniques like X-ray diffraction (XRD), optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) was employed to assess the microstructure and phase constituents. Elastic plastic (J 1c ) fracture toughness was studied well on SHT, peak aged and rolled sample. Additionally, Vickers hardness and tensile test were performed. Aging and Cold rolling treatment effectively enhanced tensile strength and hardness ascribed to formation of fine rod shape precipitates of η"(Mg 2 Zn 3 ) and formation of sub grains with localized strain accumulation, respectively Split diffraction spots with satellite pattern in long range ordering has also observed in selected area electron diffraction (SAED) pattern of η" attributable to stacking faults and periodic arrangement of precipitates, respectively, as a consequence of this 90 % cold rolling of 7075 Al alloy was accomplished. The maximum Vickers hardness, Tensile strength and Elastic plastic (J 1c ) fracture toughness values were achieved after SHT (470°C for 2 h), peak aged (PA) (140°C for 21 h) and 90 % cold rolling are 226 HV, 526 MPa and 344.54 kJ/m 2 , respectively.

Characterisation of Microstructure, Texture and Mechanical Properties of Pure Aluminium Sheets Severely Deformed by Constrained Groove Pressing and Subsequent Cold Rolling

Influence of alloy chemistry on the deformation behaviour and anisotropic properties of aluminium ultra-fine-grained thin sheets

Effect of Combined Repetitive Corrugation and Straightening and Rolling on the Microstructure and Mechanical Properties of Pure Aluminum

Microstructural Evolution and Mechanical Properties of Pure Aluminum upon Multi-Pass Caliber Rolling

Effect of Deep-Cooling Rolling Deformation on the Microstructure and Mechanical Properties of an Al-4.5Cu-1.5Mg-0.6Mn-0.2Ti Alloy

Influence of equal channel angular pressing in an acute angle die with a back pressure notch on grain refinement, torsion and mechanical properties of aluminium

Effect of Rolling and Annealing on Microstructure and Mechanical Properties of High Purity Aluminum

Mechanical and microstructural characteristics of AA6082 using thermal equal channel angular pressing for structural applications

Enhanced formability of Al–Mg–Si–Zn alloy sheet via dislocation structure and texture during cold rolling

Study on microstructure, mechanical properties, and texture of the CC AA 3105 aluminum alloy processed by high-pressure heat treatment

Preparation of high performance 5083 aluminum alloy by alternate ring-groove pressing and torsion

Effects Of Rolling Process On Microstructure And Mechanical Property Of 7050 Aluminum Alloy

Effect of thermomechanical processing on mechanical properties and microstructural evolution of Al-Mg-Zn alloy

Strain inhomogeneity and grain refinement in AA6063 aluminum alloy subjected to repetitive corrugation and straightening: comparison of experimental and finite element analysis

Texture, Microstructure and Mechanical Properties of 6111 Aluminum Alloy Subject to Rolling Deformation

Annealing Behavior of Nanostructured Aluminum Produced by Cold Rolling to Ultrahigh Strains

Thermal Stability of Aluminum Cold Rolled to Large Strain

Effect of rolling deformation and passes on microstructure and mechanical properties of 7075 aluminum alloy

Effect of recrystallization annealing, solid solution and pre-aging intermediate treatment on microstructure and mechanical properties of Al-Mg-Si rolled sheet

Evolution of microstructure and texture during severe plastic deformation of the aluminium alloy AA2099

Influence of different rolling processes on the microstructures and mechanical properties of 6016 aluminum alloy