Abstract:<p>A non-associated flow rule (non-AFR) constitutive model is proposed to describe the evolving yield stress and plastic potential surfaces of sheet metal under plane stress conditions. The yield stress function is a multiplication of two yield functions, within the first part includes an asymmetric pressure-sensitivity that considers anisotropic and asymmetric yielding of sheet metals. This yield stress function can describe anisotropic hardening behavior by directly employing the hardening functions under seven different loading conditions, i.e. uniaxial tension along 0°, 45°, 90° to the rolling direction (RD) of sheet metal, uniaxial compression along the same orientations and equi-biaxial tension without any interpolation or optimization procedure at a discrete level of equivalent plastic strain. The second part is a non-quadratic isotropic function, which is the sum of two isotropic yield functions with high flexibility in shaping the yield surface. A new plastic potential function is proposed to capture the differential Lankford coefficients (r-values) between uniaxial tension and compression obtained from mechanical testing. Eight parameters in the plastic potential function were calibrated from seven r-values under the same loading conditions and one yield stress as calibrating parameters for the yield stress function. The proposed constitutive model was validated by experimental data of three engineering sheet metals, i.e. one dual-phase steel DP980, one TRIP-assisted steel QP980 and one aluminum alloy AA5754-O and compared with several classical yield criteria. The evolving yield behavior was accurately described by the proposed non-associated flow rule (non-AFR) constitutive model.</p>

Flow stress and constitutive relations of ship plate steel continuous casting slab with solidification end reduction process

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Constitutive Analysis on High-Temperature Flow Behavior of 3Cr-1Si-1ni Ultra-High Strength Steel for Modeling of Flow Stress

Constitutive modeling and analysis on high-temperature flow behavior of 25 steel

Effect of Grade on Thermal–Mechanical Behavior of Steel During Initial Solidification

Analysis of heat transfer and thermal stress in continuous casting with mechanical reduction

Dislocation Density-Based Model for Flow Behavior of a Near-α Titanium Alloy Considering Effects of Initial Lamellar Thickness

A non-quadratic pressure-sensitive constitutive model under non-associated flow rule with anisotropic hardening: Modeling and validation

Thermal forming properties of a Cr-Mn-Si-Ni alloyed naval steel under different forming conditions by different constitutive models

A modified Johnson-Cook model considering strain softening of A356 alloy

A constitutive model on flow stress prediction from the contribution of twin and grain refinement, strain and strain rate during surface mechanical attrition treatment of metals

High temperature flow behavior and constitutive model of alloy transition layer in composite steel tube prepared by centrifugal self‐propagating high‐temperature synthesis (SHS)

Flow Stress Description Characteristics of Some Constitutive Models at Wide Strain Rates and Temperatures

Dynamic Recrystallization Behavior and Constitutive Modeling of As-Cast 30cr2ni4mov Steel Based on Flow Curves

Constitutive Modeling and Dynamic Recrystallization Mechanisms of an Ultralow-carbon Microalloyed Steel During Hot Compression Tests

A Flow Stress Model of 300M Steel for Isothermal Tension

Comparative Study on Several Constitutive Models of GCr15 Steel at High Strain Rates

Deformation Behavior and Constitutive Equation of 42CrMo Steel at High Temperature

INVESTIGATION INTO THE THERMAL DEFORMATION BEHAVIOR AND THE ESTABLISHMENT OF A CONSTITUTIVE RELATIONSHIP FOR Mn-Cr-Ni-Mo STEEL

Numerical Simulation of the Thermo-Mechanical Process for Beam Blank Continuous Casting

Constitutive behavior of as-cast A356