Abstract:Due to its multi-principal component characteristics, high-entropy alloys exhibit excellent comprehensive mechanical properties and become a new generation of engineering structure alternative materials. At present, a single constitutive model is used to describe the change of flow stress in the study of hot deformation behavior of high-entropy alloys, and there are some problems such as inaccurate prediction accuracy or inapplicability of the model in some hot processing intervals. In this paper, three different constitutive models are combined to fully consider the applicability of the model in different temperature ranges, and the change of flow stress behavior is accurately described, which is of great significance for subsequent deformation mechanism research, hot processing process optimization, numerical simulation and so on. Thermal compression experiments on cast Ni 28.5 Co 18.6 Fe 18.2 Al 16.3 Cr 10.5 Mo 4 Ti 2.3 Nb 0.6 W 0.9 C 0.2 high-entropy alloy were carried out using a Gleeble-3800 thermal simulation tester with deformation temperatures in the range from 900 °C to 1150 °C and strain rates from 0.001 s -1 to 1 s -1 . The constitutive relationships between true stress and strain, temperature and strain rate were established, while the heat deformation process of this alloy under different deformation conditions by Arrhennius, Modified Johnson-Cook and Modified Fields-Backofen models were characterized. The results indicate that Arrenius model describe the rheological behavior of the alloy better in a wider temperature range and at a wider strain rate range. Comparatively, the model shows the highest prediction accuracy in the high-temperature region and slightly lower accuracy in the mesothermal and low-temperature regions. The modified J-C and F-B models have better prediction accuracy in the low-temperature and medium-temperature regions, respectively. Due to the different deformation conditions, dislocation configurations such as dislocation tangles, dislocation networks, and subcrystalline junctions can be observed in the plastic deformation region. The dislocation density of this alloy increases with increasing strain rate and decreasing deformation temperature after deformation.

Thermal forming properties of a Cr-Mn-Si-Ni alloyed naval steel under different forming conditions by different constitutive models

Research on the thermal plasticity of the 18Mn-18Cr-0.77N-2Mo high nitrogen austenitic stainless steel

INVESTIGATION INTO THE THERMAL DEFORMATION BEHAVIOR AND THE ESTABLISHMENT OF A CONSTITUTIVE RELATIONSHIP FOR Mn-Cr-Ni-Mo STEEL

Dislocation Density-Based Model for Flow Behavior of a Near-α Titanium Alloy Considering Effects of Initial Lamellar Thickness

An Improved Constitutive Model Based on BP Artificial Neural Network and 3D Processing Maps of a Spray-Formed Al–Cu–Li Alloy

High-temperature deformation characteristics and constitutive models of Inconel 625 superalloy

Dynamic Behavior and Modified Artificial Neural Network Model for Predicting Flow Stress During Hot Deformation of Alloy 925

Dynamic Recrystallization Behavior and Constitutive Modeling of As-Cast 30cr2ni4mov Steel Based on Flow Curves

Thermodynamic Performance Test and Phenomenological Constitutive Model of NiTiNb Shape Memory Alloy

Constitutive Analysis on High-Temperature Flow Behavior of 3Cr-1Si-1ni Ultra-High Strength Steel for Modeling of Flow Stress

Machine learning-based modeling of the coupling effect of strain rate and temperature on strain hardening for 5182-O aluminum alloy

An improved cellular automaton model of dynamic recrystallization and the constitutive model coupled with dynamic recrystallization kinetics for microalloyed high strength steels

A Physically Based Constitutive Model and Continuous Dynamic Recrystallization Behavior Analysis of 2219 Aluminum Alloy during Hot Deformation Process

Study on thermal deformation constitutive model of NiCoFeAlCrMo high-entropy alloy with FCC / L12 coherent structure

Tensile properties and strain hardening mechanism of Cr-Mn-Si-Ni alloyed ultra-strength steel at different temperatures and strain rates

Precise Modeling of Thermal and Strain Rate Effect on the Hardening Behavior of SiC/Al Composite

Constitutive Modeling of the Hot Deformation Behavior in 6082 Aluminum Alloy

Thermal Deformation Behavior of Mg–3sn–1mn Mg Alloy Based on Constitutive Relation Model and Artificial Neural Network

Neural network-based ductile fracture model for 5182-O aluminum alloy considering electroplastic effect in electrically-assisted processing

The Deformation Behavior and Microstructure Evolution of a Mn- and Cr-Containing Al-Mg-Si-Cu Alloy During Hot Compression and Subsequent Heat Treatment

Hot Deformation Behavior of the 25CrMo4 Steel Using a Modified Arrhenius Model