Abstract:Isothermal compression tests of 2196 Al-Cu-Li alloy were carried out at different temperatures (633∼793 K) and strain rates (0.001∼10 s−1) on Gleeble-3500 thermal simulator until the compression reached 60 %. According to the obtained stress-strain data, the flow behavior of 2196 Al-Li alloy during thermal deformation was investigated. The Arrhenius constitutive equation of the alloy based on the hyperbolic sine function model was established. A modified constitutive model with comprehensive consideration of deformation temperature, strain rate and strain compensation was proposed. Compared with the traditional constitutive model of strain compensation, the modified model had higher prediction accuracy. The hot processing maps under different strains (0.2∼0.8) were established, it was found that the plastic instability domain mainly occurred at the low temperature and high strain rate, while the peak power dissipation domain was located in the high temperature and medium strain rate. The microstructure evolution of 2196 Al-Li alloy under different deformation conditions was characterized and analyzed by electron back scattering diffraction and transmission electron microscope. The results showed that the softening mechanism was mainly dynamic recovery with a small amount of continuous dynamic recrystallization. High temperature and low strain rate were conducive to the occurrence of dynamic recovery and recrystallization, and the microstructure was mainly characterized by low dislocation density, no dislocation entanglement and dislocation wall structure. The grain boundary was straight and smooth. Some discontinuous dynamic recrystallization occurred at low temperature and high strain rate. Based on the analysis of the hot processing maps and microstructure evolution, the optimum deformation parameters of 2196 Al-Li alloy were determined to be 733∼793 K and 0.01∼1 s−1.

An Improved Constitutive Model Based on BP Artificial Neural Network and 3D Processing Maps of a Spray-Formed Al–Cu–Li Alloy

Investigation of Constitutive Model of As-Extruded Spray-Forming 7055 Aluminum Alloy Based on BP Artificial Neural Network

Construction of aluminum alloy constitutive model based on BP neural network and the study of non-isothermal hydroforming

Prediction on Hot Deformation Behavior of Spray Formed Ultra-High Strength Aluminum Alloy-a Comparative Study Using Constitutive Models

Prediction and Evaluation of Hot Deformation Properties of Aluminum Matrix Composites Reinforced with Spray-Formed Ceramic Particles

Dislocation Density-Based Model for Flow Behavior of a Near-α Titanium Alloy Considering Effects of Initial Lamellar Thickness

A Modified Constitutive Model and Microstructure Characterization for 2195 Al-Li Alloy Hot Extrusion

An Improved Arrhenius Constitutive Model and Three-Dimensional Processing Map of a Solution-Treated Ni-Based Superalloy

Constitutive Behavior and Microstructural Evolution in Hot Deformed 2297 Al-Li Alloy

Modified artificial neural network model with an explicit expression to describe flow behavior and processing maps of Ti2AlNb-based superalloy

A New Model of the Constitutive Relationship of 2A70 Aluminum Alloy

Constitutive modeling and microstructure characterization of 2196 Al-Li alloy in various hot deformation conditions

A modified Arrhenius constitutive model of 2219-O aluminum alloy based on hot compression with simulation verification

Simulation of a Wrought Al-Cu-Mg-Ag Alloy During Hot Deformation Based on Constitutive Modelling and Process Maps

High-Precision Constitutive Model Of Ti6242s Alloy Hot Deformation Based On Artificial Neural Network

Constitutive equation and processing map for hot compressed as-cast Ti-43Al-4Nb-1.4W-0.6B alloy

New constitutive relationship model of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy

Constitutive Equations of 1060 Pure Aluminum Based on Modified Double Multiple Nonlinear Regression Model

Establishment and Comparison of Four Constitutive Models of 5A02 Aluminium Alloy in High-Velocity Forming Process

Hot Workability of a Spray Formed 2195 Aluminum-Lithium Alloy Based on an Improved Isothermal Processing Map and Drx ‘C-Curve’

A Modified Constitutive Equation for Aluminum Alloy Reinforced by Silicon Carbide Particles at Elevated Temperature