Abstract:Although different damage-coupled physically based models have been proposed, those damage models are established based on the isothermal uniaxial or multi-axial tensile condition. However, the influence of the stress state on ductile failure strain is not adequately considered in the thermal damage models. It is widely recognized that the stress state has significant effect on damage evolution and ductility fracture for metallic materials. Actually, the current damage-coupled physically based models are not suitable for complex hot forming and the applications of these damage-coupled models are mainly focused on sheet hot stamping forming to date. Therefore, a modified damage-coupled unified model considering a broad range of stress states was established to figure out the complex damage behavior and microstructure evolution of metallic materials during the thermal deformation process. In this study, the Mg-6Gd-5Y-0.3Zr alloy was used as the experimental material. First, the flow behavior of the alloy was explored using a series of experiments under various stress states (i.e., uniaxial tensile, shear and compression) under various combinations of strain rates and temperatures. On this basis, a modified damage-coupled physics-based model was developed, in which the dynamic recrystallization, damage, stress triaxiality and Lode parameter were included as internal state variables. Furthermore, the model was integrated into ABAQUS to verify the applicability using hot spinnability test because the stress state was very complex during the forming process. The comparison between the calculated results and experiments is carried out. According to the simulation result, the predicted ultimate thinning rate is 71.14%, with an error of only 7.85% from the experimentally measured ultimate thinning rate of 77.2%, and the correlation coefficient and error for thickness and profile between the predicted values and experimental values are 0.9980 and 5.05%, respectively. These demonstrate that the developed model is reliable.

Dislocation Density-Based Model for Flow Behavior of a Near-α Titanium Alloy Considering Effects of Initial Lamellar Thickness

A Physically Based Elasto-Viscoplastic Constitutive Model for Modeling the Hot Deformation and Microstructure Evolution of a Near Α Ti Alloy

Constitutive analysis of hot deformation behavior of a Ti6Al4V alloy using physical based model

Constitutive Modeling on the Ti-6Al-4V Alloy during Air Cooling and Application

Application of Constitutive Models and Machine Learning Models to Predict the Elevated Temperature Flow Behavior of TiAl Alloy

Modeling Constitutive Relationship of Ti17 Titanium Alloy with Lamellar Starting Microstructure

A Unified Internal State Variable Material Model for Ti2AlNb-alloy and Its Applications in Hot Gas Forming

Arrhenius-Type Constitutive Equation Model of Superplastic Deformation Behaviour of Different Titanium Based Alloys

Flow Behavior and Constitutive Equation of Ti-6.5Al-2Sn-4Zr-4Mo-1W-0.2Si Titanium Alloy

A Two-Stage Constitutive Model for Ti2AlNb Alloy Based on Asymptote Approach and Temperature-Corrected Stress

Modelling the Flow Behaviour of Al Alloy Sheets at Elevated Temperatures Using a Modified Zerilli-Armstrong Model and Phenomenological-Based Constitutive Models

Phenomenological Constitutive Model and Physical Constitutive Model of Hot Deformed Dual-Phase Ti-5Al-4Sn-2Zr-5Mo Alloy

Modeling the high-temperature constitutive relationship of Ti-22Al-25Nb alloy based on fuzzy theory

The Flow Stress Behavior and Physical-Based Constitutive Model for As-Quenched Al-Zn-Mg-Cu Alloy

Microstructures, hot tensile deformation behavior and constitutive modeling in a superlight Mg-2.76Li-3Al-2.6Zn-0.39Y alloy

A new constitutive model for HCP metals

Flow Stress Prediction and Hot Deformation Mechanisms in Ti-44Al-5Nb-(Mo, V, B) Alloy

Characterization and constitutive analysis-based crystal plasticity of warm flow and fracture behaviours of 2060 Al-Cu-Li alloy

A Thermally Activated Dislocation-Based Constitutive Flow Model of Nanostructured FCC Metals Involving Microstructural Evolution

Characterization of Hot Deformation Behavior and Constitutive Modeling of Al–Mg–Si–Mn–Cr Alloy

A Thermal Damage-Coupled Constitutive Model for Predicting Fracture and Microstructure Evolution and Its Application in the Hot Spinnability Process