Abstract:The effect of hydrothermal conditions on the interactions between surfactant molecules and silicate species plays a key role in the structural transformations of silica precursors. In this work the structures of different siliceous products obtained at various synthesis temperatures have been characterized by powder X-ray diffraction (XRD), FT-IR spectroscopy, Al-27 and Si-29 magic angle spinning (MAS) NMR, N-2 adsorption/desorption measurements, and thermogravimetric analysis. The XRD) results show that the removal of other soluble ions from synthesis mixture is a primary step for preparation of the mesostructure in the CTAB-silicate-water synthesis system. Increasing the hydrothermal temperature may lead to the various structures of porous silica and change the behaviors of surfactants in the synthesis mixture. With the increase of hydrothermal temperature from 100 degrees C to above 165 degrees C or the prolonging of reaction time at a fixed temperature of 170 degrees C, the transformation sequence of the following structural phases is identified by XRD: hexagonal MCM-41 --> lamellar M41S --> ZSM-5. Comparison with the results from XRD, pore structure measurement, FT-W, and NMR demonstrates that the intermediate product from the hexagonal mesostructure to microporous crystallite is the lamellar phase rather than the ill-defined hexagonal structure. DTG results indicate that the formation of different structures could result from the different surfactant templating molecules. The main contribution of this work hes in attempts to provide an effective route for controlling conditions of the formation of different mesoporous phases and to understand the cooperation of surfactant molecules and inorganic species.

Impact of Hydrothermal Treatment on the Porous Structure and Adsorption Properties of Spherically Granulated Zirconium Silicate

Effects of Hydrothermal Treatment on Mesopore Structure and Connectivity in Doped Ceria-Zirconia Mixed Oxides

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

High Pressure Synthesis versus Calcination – Different Approaches to Crystallization of Zirconium Dioxide

Hydrothermal Treatment of Macroporous ZrO2 Monoliths

Evolution of the Crystalline Structure of Zirconia Nanoparticles During Their Hydrothermal Synthesis and Calcination: Insights into the Incorporations of Hydroxyls into the Lattice

Effect of Formation Temperature of Zirconium Dioxide on its Phase Composition and the Efficiency of Adsorptive Removal of Phosphate Anions from a Water Solution

Effects of Hydrothermal Treatment and Template Removal on the Adsorption and Structural Properties of SBA-16 Mesoporous Silica

Impact of chemical and physical modification of zirconia on structure, surface state, and catalytic activity in oxidation of α-tetralol

Manufacturing and properties evaluation of Al2O3/ZrO2 granules derived from sodium alginate gelation

Solvent Effects on the Solvothermal Synthesis of PureMonoclinic and Tetragonal Zirconia Nanoparticles

Thermally stable nanocrystallised mesoporous zirconia thin films

Effect of carbonization temperature on adsorption property of ZIF-8 derived nanoporous carbon for water treatment

Investigation of electrical, corporeal, ocular, and aquaphobic properties of zirconia thin-films by varying substrate temperature for high voltage insulators

Hydrothermal synthesis of (ZrO2)0.86(Sm 2O3)0.14 nano-powders and electrical properties of its sinter

Hydrothermal Transformation and Characterization of Porous Silica Templated by Surfactants

Hydrothermal synthesis of layered zirconium phosphates and their intercalation properties

Effects Of Calcination Temperature And Template Content On The Structure And Properties Of Mesoporous Zirconia Microspheres

Mesoporous Yttria-Zirconia Solid Solution with Improved Textural Properties Prepared Via Lauric Acid-Assisted Synthesis

Co-precipitation of nano Mg–Y/ZrO2 ternary oxide eutectic system: Effects of calcination temperature