Abstract:A hydrothermal method was employed to synthesize the precursor of nano-zirconium carbide, which was subsequently heat treated at high temperatures under vacuum to obtain finely dispersed nanometer-sized zirconium carbide powder through a carbothermic reduction reaction. Scanning Electron Microscopy (SEM) was utilized to examine the microstructure of the precursors obtained under different hydrothermal conditions and carbon contents. The effects of different heat treatment temperatures on the microstructure of the products were analyzed. Transmission Electron Microscopy (TEM) confirmed the boundary coating structure of the hydrothermal precursor and provided insights into the phase structure of the nanometer-sized zirconium carbide. The reaction mechanism and temperature involved in the carbothermic reaction process were determined through calculations. Furthermore, the energy, phase and microstructure of the reaction were investigated using Thermogravimetric Analysis (TG-DSC) and X-ray Diffraction (XRD) at different temperatures. The obtained results revealed that the zirconium carbide precursor was synthesized via the hydrothermal method exhibited a coreshell structure with a boundary coating, which not only ensured uniform contact between C and ZrO2 particles but also facilitated the formation of zirconium carbide. The results show that the most suitable process parameters are Zr/C 1: 7, 240 degrees C and 24 h. The thermodynamic calculation results show that ZrO2 combines with carbon to form CO and ZrC when the temperature reaches 1656.56 degrees C. As the temperature rises, CO reacts with ZrO2 to form ZrC and CO2. TG-DSC shows that the carbothermal reduction reaction starts at 1100 degrees C and reaches its peak at 1418 degrees C. XRD analysis confirms that when the temperature reached 1450 degrees C ZrC appeared. At 1600 degrees C, the phase transition of ZrC is basically completed. TEM images showed that the synthesized zirconium carbide particles were about 30 nm.

High Pressure Synthesis versus Calcination – Different Approaches to Crystallization of Zirconium Dioxide

Fabrication of Submicron Tetragonal Polycrystalline ZrO2 by the Transformation of Micro Monoclinic ZrO2 under High Pressure

Evolution of the Crystalline Structure of Zirconia Nanoparticles During Their Hydrothermal Synthesis and Calcination: Insights into the Incorporations of Hydroxyls into the Lattice

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

Ionothermal Synthesis and Characterization of Crystalline Zirconium Phosphate from Oxalic Acid/Tetrapropyl Ammonium Bromide System

Impact of Hydrothermal Treatment on the Porous Structure and Adsorption Properties of Spherically Granulated Zirconium Silicate

Mechanism of Reduced Sintering Temperature of Al₂O₃⁻ZrO₂ Nanocomposites Obtained by Microwave Hydrothermal Synthesis

Effect of Formation Temperature of Zirconium Dioxide on its Phase Composition and the Efficiency of Adsorptive Removal of Phosphate Anions from a Water Solution

Controlled sintering and phase transformation of yttria-doped tetragonal zirconia polycrystal material

Study of Influence of Calcination Atmosphere on Phase Transformation of Zirconia by UV Raman Spectroscopy

Effect of Maltose for the Crystallization of Tetragonal Zirconia

Thermally stable nanocrystallised mesoporous zirconia thin films

Tetragonal‐to‐Monoclinic Phase Transitions in Nanocrystalline Rare‐Earth‐Stabilized Zirconia Prepared by a Mild Hydrothermal Method

Supercritical Hydrothermal Synthesis of Nano-Zirconia: Reaction Path and Crystallization Mechanisms of Different Precursors

Co-precipitation of nano Mg–Y/ZrO2 ternary oxide eutectic system: Effects of calcination temperature

Preparation of Nano-ZrO2 powder via a microwave-assisted hydrothermal method

Synthesis and thermal stability of zirconia and yttria-stabilized zirconia microspheres

Crystal structure and morphology of CeO2 doped stabilized zirconia ceramics under high-frequency microwave field sintering

Hydrothermal Synthesis of Nanocrystalline ZrO2-8Y2O3-xLn2O3 Powders (Ln = La, Gd, Nd, Sm): Crystalline Structure, Thermal and Dielectric Properties

Preparation and Characterization of Zirconium Carbide Nano Powder by Hydrothermal and Carbothermal Reduction Methods

Effect of Zr on the Microstructure and High-Temperature Phase Separation Evolution of SiOC Aerogels