Abstract:A zeolite/polymer composite hollow fiber (CHF) support is used to investigate the effects of three different silica sources (sodium metasilicate nonahydrate, silica sol and sodium silicate) of the synthesis hydrogel on the properties of zeolite LTA membrane prepared on the outer surface of the support by in situ hydrothermal synthesis at 100°C. The as-synthesized membranes and powders from the synthesis hydrogel are characterized by X-ray diffraction. The morphology and thickness of the membranes are observed by scanning electron microscopy. The separation factor and flux are evaluated by pervaporation (PV) test at 75°C using 90wt.% ethanol aqueous solution. It is difficult to obtain high performance membranes on the CHF support using sodium metasilicate nonahydrate as silica source, while continuous zeolite membranes with high separation factor (>10,000) and flux (>6.4kg/m2h) can be well synthesized using silica sol or sodium silicate as silica source. The reason of these differences is further explored by changing the alkalinity of the synthesis hydrogel (the content of sodium hydroxide). It is found that the crystallization rate of the synthesis hydrogel is a crucial factor to obtain zeolite membranes with high PV performance by static in situ hydrothermal synthesis. The separation performance of the membrane synthesized even using sodium metasilicate nonahydrate as silica source can be greatly improved by dynamic hydrothermal synthesis using rotating autoclaves.

Hydrothermal Treatment of Macroporous ZrO2 Monoliths

Preparation of Macroporous Zirconia Monoliths via Sol-Gel Process Accompanied by Phase Separation

In-situ construction of hierarchically porous MOF monoliths using high internal phase emulsion templates

Preparation of macroporous zirconia monoliths from ionic precursors via an epoxide-mediated sol-gel process accompanied by phase separation

Synthesis of Monolithic Zirconia with Macroporous Bicontinuous Structure Via Epoxide-Driven Sol–gel Process Accompanied by Phase Separation

Preparation of Macroporous Transition Metal Hydroxide Monoliths Via a Sol-Gel Process Accompanied by Phase Separation

Preparation of macroporous Li2ZrO3 monoliths via an epoxide-mediated sol–gel process accompanied by phase separation

Preparation and Characterization of Macroporous Mayenite Monoliths

Effect of Hydrothermal Treatment on Suppressing Coking of Zsm-5 Zeolite During Methanol-To-Propylene Reaction

Sol–gel Synthesis of Macroporous Barium Zirconate Monoliths from Ionic Precursors Via a Phase Separation Route

Preparation of Li-doped ZrO2 Porous Monoliths via Sol-Gel Process Accompanied by Phase Separation

Interconnected Porous Monolith Prepared Via UiO-66 Stabilized Pickering High Internal Phase Emulsion Template

Preparation of Mullite Monoliths with Well-Defined Macropores and Mesostructured Skeletons Via the Sol–gel Process Accompanied by Phase Separation

Preparation of Porous YSZ Monoliths via Sol-gel Process Accompanied by Phase Separation

Preparation of Macroprous C12A7 Mayenite Monoliths Via a Sol-Gel Process with Nitrates As Precursors

Preparation of a Hierarchically Porous AlPO4monolith Via an Epoxide-Mediated Sol–gel Process Accompanied by Phase Separation

Macroporous MgO Monoliths Prepared by Sol–gel Process with Phase Separation

Macroporous Sio2 Monoliths Prepared Via Sol-Gel Process Accompanied by Phase Separation

Preparation of Porous ZnAl2O4 Spinel Monoliths Through Sol-Gel Route Accompanied with Phase Separation

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

Effects of the synthesis hydrogel on the formation of zeolite LTA membranes