Abstract:The effects of austenitizing and austempering temperatures on the bainite transformation kinetics and the microstructural and mechanical properties of a medium-carbon high-silicon ultra-fine bainitic steel were investigated via dilatometric measurements, microstructural characterization and mechanical tests. It is demonstrated that the optimum austenitizing temperature exists for 0.3 wt.%C ultra-fine bainitic steel. Although the finer austenite grain at 950 °C provides more bainite nuclei site and form finer bainitic ferrite plates, the lower dislocation density in plates and the higher volume fraction of the retained austenite reduces the strength and impact toughness of ultra-fine steel. When the austenitizing temperature exceeds 1000 °C, the true thickness of bainitic ferrite plates and the volume fraction of blocky retained austenite in the bainite microstructure increase significantly with the increases in austenitizing temperature, which do harm to the plasticity and impact toughness. The effect of austempering temperature on the transformation behavior and microstructural morphology of ultra-fine bainite is greater than that of austenitizing temperature. The prior martensite, formed when the austempering temperature below Ms, can refine the bainitic ferrite plates and improve the strength and impact toughness. However, the presence of prior martensite divides the untransformed austenite and inhibits the growth of bainite sheaves, thus prolonging the finishing time of bainite transformation. In addition, prior martensite also strengthens the stability of untransformed austenite though carbon partition and enhances the volume fraction of blocky retained austenite, which reduces the plasticity of ultra-fine bainitic steel. According to the experimental results, the optimum austempering process for 0.3 wt. %C ultra-fine bainitic steel is through austenitization at 1000 °C and austempering at 340 °C.

Inverted multi-step bainitic austempering process routes: Enhanced strength and ductility

Effect of pre-formed martensite quenching plus inverted multi-step heat treatment on medium-carbon alloy steel

Microstructure and Properties of a Low Carbon Bainitic Steel Produced by Conventional and Inverted Two-Step Austempering Processes

Enhanced Strain Hardening Capacity in a Lean Alloy Steel Treated by a “disturbed” Bainitic Austempering Process

Stabilizing austenite via intercritical Mn partitioning in a medium Mn steel

Comparison of Microstructure and Mechanical Properties of a High‐Carbon Bainitic Steel Treated by Long‐Time Bainitic Austempering and Short‐Time Austempering Plus Tempering Processes

Tailoring the metastable reversed austenite from metastable Mn-rich carbides

Enhanced Mechanical Properties of Ultrahigh Strength Mn–Si–Cr–C Steels Treated by a Novel Bainitic Transformation Plus Quenching and Partitioning Process

Ultra-Fine Bainite in Medium-Carbon High-Silicon Bainitic Steel

A Carbide-Free Bainite/martensite/austenite Triplex Steel with Enhanced Mechanical Properties Treated by a Novel Quenching–partitioning–tempering Process

Low-Carbon Bainite Steel with High Strength and Toughness Processed by Recrystallization Controlled Rolling and Ultra Fast Cooling (RCR+UFC)

Constructing multi-scale retained austenite makes bainitic steel better mechanical properties by introducing weak chemical heterogeneity

Controlling the Thermal Stability of a Bainitic Structure by Alloy Design and Isothermal Heat Treatment

Effect of two-step ausforming on bainite transformation and retained austenite in a medium-carbon bainitic steel

Effect of Austempering Processes on the Tensile Properties and the Work-Hardening Behavior of Austempered Bainitic Steels Below the Martensite Start Temperature

The potential of mechanical twinning in ultrafine retained austenite to enhance high cycle fatigue property of advanced bainitic steels

The Role of Microstructural Constituents on Strength–Ductility–Local Formability of a Transformation‐Induced‐Plasticity‐Aided Bainitic Steel

Development of Air‐Cooled Carbide‐Free Bainite/Martensite Multiphase Steel: Transformation Kinetics, Microstructure, and Mechanical Properties

Tempering response and improved mechanical properties in secondary hardened steel by introducing an optimized austempering process

Accelerated Isothermal Phase Transformation and Enhanced Mechanical Properties of Railway Wheel Steel: The Significant Role of Pre‐Existing Bainite