Abstract:The thermal expansion and thermal diffusion properties of Fe-Al alloys were measured using dilatometric and laser flash methods. At two allotropic transformation temperatures, the length change of the rapidly solidified pure Fe by injection casting deviates from that of the pure Fe by heating-cooling processing in a dilatometer. The ferro-/paramagnetic transition and second order transition do not influence the thermal expansion behaviors of Fe-Al alloys as temperature increases from 473 to 1373 K. The thermal expansion coefficients of Fe70Al30, Fe60Al40 and Fe53Al45 alloys are apparently larger than those of Fe25Al73 and FesoAlio alloys. Once temperature exceeds 877 K, the thermal expansion coefficients of Fe-Al alloys are enhanced with the increase of Al content, except for Fe23Al75 alloy owing to the large packing factor of FeAl3 crystal structure. In the temperature range from 309 to 877 K, the thermal diffusivity as a function of temperature decreases in the sequence of Fe90Al10, Fe55Al45, Fe60Al40, Fe70Al30 and Fe25Al73, and their values are lower than that of pure Fe at the same temperatures. As temperature increases, the thermal diffusivity values of Fe-Al alloys increase, except that of Fe90Al10 alloy decreases in the temperature range from 294 to 979 K and then increases once temperature further increases to 1078 K because of the ferro-/paramagnetic transition. Their thermal expansion coefficient and thermal diffusivity serve as linear or polynomial functions of temperature. (C) 2017 Elsevier B.V. All rights reserved.

Thermal Expansion and Phase Transformation up to 1200 °C of Metastable Aluminas Produced by Flame Spraying

The Microstructure of Al2O3/TiO2-NiCrBSi Graded Thermal Barrier Coatings Produced by Flame Spraying

Size Dependent Phase Transformation in Atomized TiAl Powders

RETRACTED: Phase Transition and Thermal Expansion of the LaAlO3 Single Crystal at High Temperatures

Thermal Expansion of a Multiphase Intermetallic Ti-Al-Nb-Mo Alloy Studied by High-Energy X-ray Diffraction

The structure and phase transformations in fumed transition alumina by X-ray diffraction and solid-state NMR

Structure and phase changes of alumina produced by flame hydrolysis

Thermal Stability of Bulk Zr2Al4C5 Ceramic at Elevated Temperatures

Investigation of the thermal expansion of the refractory materials at high temperatures

Controlling the phase transformation of alumina for enhanced stability and catalytic properties

Experimental Determination of the 1300 °C and 1400 °C Isotherms for CaO–SiO2–TiO2-10 Wt% Al2O3 System in Air

Structure and phase transformations of amorphous-nanocrystalline Al-based alloy

Modeling of Θ → Α Alumina Lateral Phase Transformation with Applications to Oxidation Kinetics of NiAl-based Alloys

Thermal Performance Determination of Binary Fe-Al Alloys at Elevated Temperatures

Phase Relations of the Sm–Ni–Al Ternary System at 800 °C in the 30–100 at.% Al Region

Thermodynamic and microstructural study of Ti2AlNb oxides at 800 °C

THERMAL EXPANSION IN AIR OF CERAMIC OXIDES TO 2200 C

Phase relationships and transformations in the ternary aluminum—titanium—tantalum system

Comprehensive microstructural and optical characterization of the thermal stability of aluminum-titanium oxynitride thin films after high temperature annealing in air

Effect of Ce–Zr Mixed Oxides on the Thermal Stability of Transition Aluminas at Elevated Temperature

Evolution of Fe-Rich Phases in Thermally Processed Aluminum 6061 Powders for AM Applications