Abstract:The CaO–Al2O3–SiO2 system is a fundamental system in aluminosilicate materials, and its thermodynamic description provides key information for ceramic design, cement production, slag tapping, and geological prediction. However, the existing thermodynamic calculations for the CaO–Al2O3 system show inaccurate heats of formation for the compounds and consequently a decomposition of the CA2 (CaO⋅2Al2O3) phase at a low temperature. Besides, the solid solutions in anorthite and cristobalite have never been considered in the previous thermodynamic assessments for the CaO–Al2O3–SiO2 system. Therefore, thermodynamic reassessments of the CaO–Al2O3 and CaO–Al2O3–SiO2 systems are carried out in the present work using the CALculation of PHAse Diagram method, considering the solid solution in anorthite and cristobalite for the first time. The anorthite and cristobalite phases are modeled based on the individual mechanism of solid solution, with the anorthite described by (Ca+2, Va)1(Al+3, Si+4)2(Si+4)2(O−2)8 and the cristobalite described by (Va, Ca+2)1(Si+4, Al+3)2(O−2)4. The present assessment solves the above issues and provides consistent thermodynamic descriptions for the liquid and solid phases. Based on the established thermodynamic database, a Scheil solidification simulation is carried out for a cement clinker and the variations of mass fractions of the phases as well as the composition of liquid during Scheil cooling are calculated. The present work guides the design of relevant materials and lays an essential foundation for the establishment of the thermodynamic database of multicomponent aluminosilicate materials.

Experimental Determination of the 1300 °C and 1400 °C Isotherms for CaO–SiO2–TiO2-10 Wt% Al2O3 System in Air

Phase Equilibria Studies for CaO–SiO2-5wt.%MgO–Al2O3–TiO2 System in High Al2O3 Content Area with W(cao)/w(sio2) Ratio of 1.50

EXPERIMENTAL STUDY ON THE PHASE RELATIONS OF THE SYSTEM Mg2SiO4-MgAl2O4 AT HIGH PRESSURE AND HIGH TEMPERATURE

Phase Equilibrium Investigation for CaO-SiO2-5wt.%MgO-20wt.%Al2O3-TiO2 System Relevant to Ti-bearing Slag System

Effect of Al2O3 Addition on the Phase Equilibria Relations of CaO-SiO2-5 Wt%mgo-Al2o3-tio2 System Relevant to Ti-bearing Blast Furnace Slag

Isothermal Phase Diagram of CaO-SiO2-Nb2O5-5 wt.% Fe2O3-TiO2 System at 1100 °C

Phase equilibria studies in the CaO–SiO 2 –Al 2 O 3 –MgO system with CaO/SiO 2 ratio of 0.9

Phase equilibria of the Na2O‐TiO2‐SiO2 system between 900 and 1600°C in air

Thermodynamic descriptions of the CaO–Al2O3 and CaO–Al2O3–SiO2 systems over the whole composition and temperature ranges

Phase equilibrium investigations of the Al2O3–Ta2O5 system: New experiments and thermodynamic modeling

Experimental Phase Equilibria Studies in the FeO-Fe2O3-CaO-Al2O3 System in Air

Experimental investigation of the phase relations in the SiO2-Dy2O3-CaO ternary system

Experimental Phase Equilibria Studies in the FeO-Fe2O3-CaO-SiO2 System in Air: Results for the Iron-Rich Region

Equilibrium of Copper Matte and Silica-Saturated Iron Silicate Slags at 1300 °C and $$ P_{{{\text{SO}}_{ 2} }} $$ of 0.5 Atm

Effect of Al2o3 Addition on the Precipitated Phase Transformation in Ti-Bearing Blast Furnace Slags

Phase equilibria and thermodynamic assessment of the Al2O3-SiO2-Sc2O3 system

Phase diagram of V2O3-FetO-SiO2-CaO(15 mass%) system at 1623 K

Equilibrium of Copper Matte and Silica-Saturated Iron Silicate Slags at 1300 °C and PSO2\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \Setlength{\oddsidemargin}{-69Pt}

Isothermal Section of the Al2O3–TiO2–Er2O3 Phase Diagram at 1400°C

Phase equilibria in the TiO2–Nb2O5 system: New experiments and thermodynamic modeling

The Phase Diagram of a CaO-Al2O3-VOx Slag System under Argon Atmosphere at 1500 °C