Abstract:The distribution of copper and lead between copper rich alloy and alumina saturated flash smelting slag produced from Polish copper concentrates was investigated at 1673 and 1553 K under controlled oxygen partial pressures in the range from 8.6·10−13 to 3.1·10−7 atm in order to obtain fundamental information related to single stage flash smelting of Polish copper concentrates and decopperizing of the flash smelting slags. The slope of the linear relationship between the logarithmic distribution ratio and oxygen partial pressure shows that the predominant species dissolved in the slag are CuO0.5 and Cu for copper and PbO and Pb for lead. Activity coefficients for all these copper and lead species in the slag were determined and compared with those in synthetic SiO2-CaO-Al2O3-FeOx and SiO2-CaO-Al2O3-MgO-FeOx slags containing up to 7.5 mass% iron. Existence of a miscibility gap in the flash smelting slag was confirmed at the oxygen partial pressures used in the experiments. The results were used to explain the thermodynamic reasons behind potential problems in the decopperizing of the flash smelting slag. On a investigué la distribution du cuivre et du plomb entre un alliage riche en cuivre et la scorie de la fusion éclair saturée en oxyde d’aluminium, produite à partir de concentrés de cuivre polonais, à 1673 et 1553 K, sous des pressions partielles contrôlées d’oxygène dans la gamme de 8.6·10−13 à 3.1·10−7 atm. L’objectif était d’obtenir l’information fondamentale reliée à la fusion éclair à étape unique des concentrés de cuivre polonais et au décuivrage des scories de la fusion éclair. La pente de la relation linéaire entre le ratio de distribution logarithmique et la pression partielle de l’oxygène montre que les espèces prédominantes dissoutes dans la scorie sont le CuO0.5 et le Cu pour le cuivre et le PbO et le Pb pour le plomb. On a déterminé les coefficients d’activité de toutes ces espèces de cuivre et de plomb dans la scorie et on les a comparés avec ceux de scories synthétiques SiO2-CaO-Al2O3-FeOx et SiO2-CaO-Al2O3-MgO-FeOx contenant jusqu’à 7.5% en masse de fer. On a confirmé l’existence d’une interruption de miscibilité dans la scorie de la fusion éclair aux pressions partielles d’oxygène utilisées dans les expériences. On a utilisé les résultats pour expliquer les raisons thermodynamiques derrière les problèmes potentiels de décuivrage de la scorie de la fusion éclair.

Equilibrium of Copper Matte and Silica-Saturated Iron Silicate Slags at 1300 °C and PSO2\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \Setlength{\oddsidemargin}{-69Pt}

Equilibrium of Copper Matte and Silica-Saturated Iron Silicate Slags at 1300 °C and $$ P_{{{\text{SO}}_{ 2} }} $$ of 0.5 Atm

Experimental Study on the Phase Equilibrium of Copper Matte and Silica-Saturated FeO X -Sio 2 -Based Slags in Pyrometallurgical WEEE Processing

Multiphase Equilibrium Relationships between Copper Matte and CaO-Al2O3-Bearing Iron Silicate Slags in Combined Smelting of WEEE and Copper Concentrates

Thermodynamic Analysis of Mineral Phase Composition of Steel Slag System

Phase Equilibria Study of the MgO–CaO–SiO2 Slag System with Ferronickel Alloy, Solid Carbon, and Al2O3 Additions

THERMODYNAMICS OF COPPER AND LEAD IN ALUMINA SATURATED FLASH SMELTING SLAG

Experimental Determination of the 1300 °C and 1400 °C Isotherms for CaO–SiO2–TiO2-10 Wt% Al2O3 System in Air

MATTE-SLAG SEPARATION BEHAVIOR AS A FUNCTION OF IRON PHASE REDUCTION IN COPPER SLAG

Polymeric Structure Evolution Behavior Analysis of Aluminosilicate-Based Smelting Slag

Phase Equilibrium Investigation for CaO-SiO2-5wt.%MgO-20wt.%Al2O3-TiO2 System Relevant to Ti-bearing Slag System

Phase Distribution During Slag Formation in Mn Ferroalloy Production

Thermodynamic Phase Conversion Mechanism on Copper–Cobalt Slag Cleaning Process Using Gypsum Wastes as Sulfurizing Agent

Modeling of Exchange Interactions in Melts Formed During Joint Smelting of Oxidized Nickel Ores and Pyrrhotite Concentrates

The Phase Transition and Element Distribution of Copper Smelting Slag in the Cooling—Sulfidation Process

Thermodynamics Evaluation and Verification of High-Sulfur Copper Slag Composite Agglomerate in Oxidation-Roasting-Separation-Leaching Process

Effect of Iron Phase Evolution on Copper Separation from Slag Via Coal-Based Reduction

Dissolution Behavior Of Sio2 In The Molten Blast Furnace Slags

Density, viscosity and surface tension of high-silicate CaO–SiO2 and CaO–SiO2–Fe2O3 slags derived by aerodynamic levitation. The behavior of Fe3+ in high-silicate melts

Phase Equilibria Studies for CaO–SiO2-5wt.%MgO–Al2O3–TiO2 System in High Al2O3 Content Area with W(cao)/w(sio2) Ratio of 1.50

Phase Equilibrium Studies of Nonferrous Smelting Slags: A Review