Abstract:The physical and chemical properties of the CaO–SiO2–Al2O3–MgO slag system depend on structure evolution caused by the synergistic mechanism among the components at high temperature, especially the structural complexity of the anion group. In this study, Si–O, Al–O, and Al–Si–O anion groups were found in the high-temperature slag systems at 1773 K. The [Si2O5]2− (Q3) structural unit of the silicate polymer changed to [Si2O6]4− (Q2), [Si2O7]6− (Q1), and [SiO4]4− (Q0) as the binary basicity (R2) and ω(MgO)/ω(Al2O3) increased, while there was a trend toward a simplified structure. That is, the stability of each structural unit weakened, and the relative content of non-bridging oxygen increased. As a result, the degree of polymerization of slag decreased, and the experimental results of the relative content of non-bridge oxygen can be fitted well with the calculations from the reference documents. At the same time, the number of Si–O–Al structural units gradually decreased. The 27Al-MAS-NMR spectroscopy results showed that the structure of aluminate changed from [AlO4]5− tetrahedral structure to [AlO5]7− pentahedral and [AlO6]9− octahedral structure, and the degree of polymerization of the slag decreased. Comprehensive analysis showed that basicity controlled within 1.2 with the ω(MgO)/ω(Al2O3) ratio; less than 0.55 allows for suitable fluidity and energy-saving ability, which is beneficial for the stable and smooth production of the blast furnace.

Phase Equilibrium Investigation for CaO-SiO2-5wt.%MgO-20wt.%Al2O3-TiO2 System Relevant to Ti-bearing Slag System

Effect of Al2O3 Addition on the Phase Equilibria Relations of CaO-SiO2-5 Wt%mgo-Al2o3-tio2 System Relevant to Ti-bearing Blast Furnace Slag

Isothermal Phase Diagram of CaO-SiO2-Nb2O5-5 wt.% Fe2O3-TiO2 System at 1100 °C

EXPERIMENTAL STUDY ON THE PHASE RELATIONS OF THE SYSTEM Mg2SiO4-MgAl2O4 AT HIGH PRESSURE AND HIGH TEMPERATURE

Experimental Determination of the 1300 °C and 1400 °C Isotherms for CaO–SiO2–TiO2-10 Wt% Al2O3 System in Air

Phase Equilibria Studies for CaO–SiO2-5wt.%MgO–Al2O3–TiO2 System in High Al2O3 Content Area with W(cao)/w(sio2) Ratio of 1.50

Effect of Al2o3 Addition on the Precipitated Phase Transformation in Ti-Bearing Blast Furnace Slags

The Phase Diagram of a CaO-Al2O3-VOx Slag System under Argon Atmosphere at 1500 °C

Precipitation Behaviour of Ti Enriched Phase in Ti Bearing Slag

Changes of Two Phase Composition in Phase Separation Process of Na2o-Cao-Al2o3-B2o3-Sio2-Tio2 System

Phase equilibria relations in the V2O5-rich part of the Fe2O3-TiO2-V2O5 system at 1200°C related to converter vanadium-bearing slag

Phase Equilibria Study of the MgO–CaO–SiO2 Slag System with Ferronickel Alloy, Solid Carbon, and Al2O3 Additions

Phase equilibria studies in the CaO–SiO 2 –Al 2 O 3 –MgO system with CaO/SiO 2 ratio of 0.9

Phase equilibria of the Na2O‐TiO2‐SiO2 system between 900 and 1600°C in air

Phase Diagram of CaO-Al2O3-VOx Slag System Under Reducing Atmosphere

The Influence of SiO2 on the Extraction of Ti Element from Ti‐bearing Blast Furnace Slag

The Study on the Interface Reaction Characteristics of Different Binary Slag, CaO – MgO, Al2O3 – CaO, Al2O3 – MgO, SiO2 – CaO, SiO2 - MgO

Study on the Melting Temperature of CaF2-CaO-MgO-Al2O3-TiO2 Slag under the Condition of a Fixed Ratio of Titanium and Aluminum in the Steel during the Electroslag Remelting Process

Polymeric Structure Evolution Behavior Analysis of Aluminosilicate-Based Smelting Slag

Influence of TiO2 on the liquidus temperature and structure of CaO-SiO2-Fe2O3-TiO2 slags

The Interface Characteristics of High-Temperature Melt of CaO-Al2O3-MgO-SiO2 System