Abstract:Rationale: Materials based on the Al2 O3 -SiO2 -ZrO2 system are promising for a wide range of high-temperature technological applications, such as thermal barrier coatings in the aviation and space industry or advanced materials in nuclear power reactors. Experimental studies of the ceramics based on this system by the Knudsen effusion mass spectrometric (KEMS) method are of significant interest in designing technological processes for the synthesis and exploitation of the Al2 O3 -SiO2 -ZrO2 materials. Methods: Samples of ceramics in the Al2 O3 -SiO2 -ZrO2 system, including the Al2 O3 -ZrO2 and SiO2 -ZrO2 binaries, were prepared by solid-state synthesis. Analysis of the samples was performed by X-ray fluorescence and diffraction techniques. The vapor composition and thermodynamic properties of the components in this system were determined by KEMS. The derived thermodynamic functions were optimized within the generalized lattice theory of associated solutions (GLTAS). Results: In the temperature range 1900-2600 K, the SiO, Al, AlO, Al2 O, ZrO, ZrO2 , and O vapor species were identified over the samples in the systems under study. For the thermodynamic properties to be determined correctly, the samples of the Al2 O3 -SiO2 -ZrO2 system had to be vaporized at temperatures less than 2000 K, where data could be obtained only for the SiO species. The SiO2 activities obtained were taken as the experimental basis for the modeling within the GLTAS approach. This allowed evaluation of the component activities and excess Gibbs energy, and assessment of the relative number of bonds of different types. Conclusions: At 1920 K, the Al2 O3 -SiO2 -ZrO2 system is characterized by negative deviations of its thermodynamic properties from the ideal behavior. The consistency of the obtained modeling results was illustrated by comparison of the values derived from the data for the ternary and the boundary binary systems and thereby indicates the reasonable uniformity of the energy parameters of the lattice model derived in the calculations, which may be used in further modeling of multicomponent systems.

Investigation of the thermal expansion of the refractory materials at high temperatures

Study on Performance Stability of the Sapphire Fiber and Cladding under High Temperature

THERMAL EXPANSION IN AIR OF CERAMIC OXIDES TO 2200 C

RETRACTED: Phase Transition and Thermal Expansion of the LaAlO3 Single Crystal at High Temperatures

High-temperature mass spectrometric study and modeling of ceramics based on the Al2 O3 -SiO2 -ZrO2 system

Calculation of Thermal Expansion Coefficient of Rare Earth Zirconate System at High Temperature by First Principles

Thermal Expansion of SrZrO3 and BaZrO3 Perovskites

Research of Fe-Cr Alloys Properties at High Temperature

Thermal Expansion of 3C-SiC Obtained from In-Situ X-ray Diffraction at High Temperature and First-Principal Calculations

Thermal Stability of Bulk Zr2Al4C5 Ceramic at Elevated Temperatures

Thermal Conductivity: V, High‐Temperature Method and Results for Alumina, Magnesia, and Beryllia from 1000° to 1800°C

Thermal expansion coefficient of single crystal silicon from 7 K to 293 K

Structural and Controllable Thermal Expansion Properties of Sc2−xAlxMo3O12

High-temperature thermal expansion behaviour of C/SiC studied using an in-situ optical visualisation method and numerical simulations in a quartz lamp array heating environment

Calculational and Experimental Investigation into the Thermal Conductivity of Materials of Ceramic Casting Molds. I. Experiment

Thermal Expansion and Phase Transformation up to 1200 °C of Metastable Aluminas Produced by Flame Spraying

Thermal Performance Determination of Binary Fe-Al Alloys at Elevated Temperatures

Specific Heat and Thermal Expansion of Refractory Nonmetal: CaO

Sintering Behavior and Mechanical Properties of Alumina-Coated Zirconia Ceramics

Synthesis And Thermal Expansion Of The Rare-Earth Zirconate Ceramics

Phase Transitions and Thermal Expansion of BaCO3 and SrCO3 Up to 1413 K