Abstract:The oxidation of aluminium nanoparticles coupled with crystallisation of amorphous alumina shell is investigated through the thermogravimetric analyser and differential scanning calorimetry (TGA-DSC) and the transmission electron microscope (TEM). The thermogravimetric (TG) curves show stepwise shapes with temperature increase and could be divided into four stages. The reaction at the second stage is complex, including the simultaneous crystallisation of amorphous alumina (am-Al2O3) and Al oxidation. The crystallisation of am-Al2O3 promotes the reaction through generating fast diffusion channels, like micro-cracks and grain boundaries in the oxide shell to accelerate the ionic diffusion. An enhancement factor (f(react)), which follows a power-law formula with the crystallisation rate, is introduced to quantify the impact of crystallisation on reaction. With heating rate increase, the second stage of TG curves shifts to the high temperature regime and the total weight gain at the second stage decreases slowly. A crystallisation-reaction model is constructed to fit and predict the weight gain after derivation of diffusivities and crystallisation kinetics. Modelling indicates that with heating rate rise, the mass increment at the second stage of TG curves decreases owing to the reduced reaction time, although the reaction is accelerated. The shift of TG curve to higher temperature is due to the polymorphic phase transition. Actually the derived kinetics of the crystallisation of amorphous alumina indicates that the polymorphic phase transformation mechanism works mainly below the heating rate of 3 Ks(-1). At higher heating rate, the melting of Al takes place firstly and the crystallisation of am-Al2O3 follows to enhance the ionic diffusion. Therefore, when the heating rate is fast during ignition or combustion, the Al nanoparticles undergo both the melting of Al and the polymorphic phase transition of am-Al2O3 to accelerate the reaction.

Modeling of Θ → Α Alumina Lateral Phase Transformation with Applications to Oxidation Kinetics of NiAl-based Alloys

Dynamic Scaling Behaviour of Late-Stage Phase Separation in Ni75AlxV25−xalloys

Coarsening Kinetics of Intermetallic Precipitates in Ni75AlxV25−x Alloys

Microscopic Phase-Field Simulation of Coarsening Behavior of Precipitates in Ni75alxv25-X Alloy

Inversion calculation of the interatomic potentials for Ni0.75AlxMo0.25-x alloy employing microscopic phase-field model

Microscopic Phase-Field Simulation for Nucleation Incubation Time of Ni75AlxV25−x Alloy

Phase-Field Study on Competition Precipitation Process of Ni-Al-V Alloy

Computer simulation of interface evolution for an Al-Li alloy during early aging stage

Early Stages of Precipitation in Γ' Phase of a Ni–Al–Ti Model Alloy: Phase-Field and First-Principles Study

Modeling of the Precipitation Kinetics and Morphology Evolution of Lamellar Α in Ti-alloys During Non-Isothermal Treatments

Thermodynamic insight into the growth of nanoscale inclusion of Al-deoxidation in Fe–O–Al melt

Microscopic Phase-Field Simulation of the Coarsening Behavior of Coherent Precipitates in Ni-Al Alloys

Microscopic Phase-field Simulation for Microstructure Evolution of Ni(75)Al(x)Cr(25-x)Alloy

High-temperature Oxidation of Pure Al: Kinetic Modeling Supported by Experimental Characterization

Simulation of Microstructure Evolution of Ni75al2.9v22.1 Alloy with Progressive Aging Mechanisms

Microscopic Phase-Field Simulation for Ni3al Pricipitation in Ni-Al Alloy

Mechanism and modelling of aluminium nanoparticle oxidation coupled with crystallisation of amorphous Al2O3 shell

The Temperature Influence on Early Precipitation Process of Ni-Al-Fe Alloy

Microscopic Phase-Field Simulation Including Elastic Strain Energy for Early Precipitation Process of Ni-Al Alloys with Medium Al Content

Phase-Field Modeling of Kinetics of Diffusive Phase Transformation in Compositionally-Graded Ni-Based Superalloys

Modeling of metastable phase formation for sputtered Ti1-xAlxN thin films