Abstract:The iron element in electric arc furnace (EAF) slag is extremely difficult to recycle due to the low specific magnetic susceptibility of the RO phase (a solid solution of FeO, MgO, CaO, and MnO). Landfilling EAF slag is strictly forbidden for environmental consideration because of poisonous Cr6+ leaching. The original RO phase could be transformed to a spinel structure, whose specific magnetic susceptibility is much higher than that of other minerals, through hot modification, resulting in significantly increased iron recovery by magnetic separation. Precipitation of spinel crystals encloses chromium, such that iron and chromium could be recovered simultaneously. The chromium in obtained iron concentrates is considerably useful for stainless steel making rather than polluting the environment. As a result, recovering iron and chromium is truly beneficial for cleaner production. Hot modification of EAF slag should be conducted at 1500–1600 °C for at least 60 min to guarantee homogeneous liquid slag. The liquid slag was poured onto an iron mold to obtain modified slag (MS) through air quenching. MS was characterized by thermodynamic analysis, X-ray diffraction, and scanning electron microscopy combined with energy-dispersive spectroscopy to correlate the relationship between mineral structures and iron recovery. The iron recovery rate of MS first increased and then decreased with increasing modifier. It was less than 10% when the modifier addition amount was below 12 wt.%, but it increased rapidly as the modifier addition amount increased from 16 to 24 wt.%, mainly due to spinel formation. The highest iron recovery rate was 81.9% when the modifier amount reached 20 wt.%. Meanwhile, Cr6+ was enriched in the spinel phase but was not observed in other minerals. Industrial tests were performed on-site with the modifier ranging from 12 to 18 wt.% because additional heat was not provided during the tests. Results showed that MS with 18 wt.% modifier addition exhibited an iron recovery rate of 61.0%, much higher than that (34.6%) of the original slag.

Study on the recovery of phosphorus and iron from molten modified high-phosphorus industrial slag by carbothermal reduction

Behavior of Carbothermal Dephosphorization of Phosphorus-Containing Converter Slag and Its Resource Utilization

Development of Iron Recovery Technique from Steelmaking Slag by Reduction at High Temperature

Study on the Effect of Different Factors on the Change of the Phosphorus-Rich Phase in High Phosphorus Steel Slag

A Kinetic Study on Selective Leaching of Phosphorus from Dephosphorization Slag

Effect of highly oxidizing converter dephosphorization slag on dephosphorization behaviour of molten steel

Study on Efficient Dephosphorization in Converter Based on Thermodynamic Calculation

Synergetic modification of industrial basic oxygen furnace slag and copper slag for efficient iron recovery

Thermodynamic Analysis of Mineral Phase Composition of Steel Slag System

Efficient extraction of phosphate from dephosphorization slag by hydrochloric acid leaching

Recovery of iron from high phosphorus oolitic iron ore using coal-based reduction followed by magnetic separation

Experiment study on the high-phosphorus hematite carbothermal reduction in microwave field

Dephosphorization kinetics of high-P-containing reduced iron produced from oolitic hematite ore

Leaching behavior and microstructure of phosphorus in converter slag

Separation and recovery of phosphorus from steelmaking slag via a selective leaching–chemical precipitation process

Dephosphorisation behaviour of blast oxygen furnace (BOF) slag due to carbothermal reduction

Novel method for improving iron recovery from electric arc furnace slag: on-site hot modification

Wet magnetic separation of phosphorus containing phase from modified BOF slag

A review on the P enrichment and recovery from steelmaking slag: Towards a sustainable P supply and comprehensive utilization of industrial solid wastes

Co-modification of BOF Slag and Copper Slag to Recover Valuable Metals by Carbothermal Reduction

Phosphorus Migration Behavior in the Process of Converter Slag Gasification Dephosphorization