Abstract:Given the accelerating depletion of iron ore resources, there is growing concern within the steel industry regarding the availability of high-phosphorus iron ore. However, it is important to note that the utilization of high-phosphorus iron ore may result in elevated phosphorus content and notable fluctuations in molten iron, thereby imposing additional challenges on the dephosphorization process in steelmaking. The most urgent issue in the process of converter steelmaking is how to achieve efficient dephosphorization. In this study, the influence of various factors on the logarithm of the phosphorus balance distribution ratio (lgLp), the logarithm of the P2O5 activity coefficient (lgγP2O5), and the logarithm of the phosphorus capacity (lgCp) were examined through thermodynamic calculations. The impact of each factor on dephosphorization was analyzed, and the optimal conditions for the dephosphorization stage of the converter were determined. Furthermore, the influence of basicity and FetO content on the form of phosphorus in the slag was analyzed using FactSage 7.2 software, and the precipitation rules of the slag phases were explored. The thermodynamic calculation results indicated that increasing the basicity of the dephosphorization slag was beneficial for dephosphorization, but it should be maintained below 3. The best dephosphorization effect was achieved when the FetO content was around 20%. The reaction temperature during the dephosphorization stage should be kept low, as the dephosphorization efficiency decreased sharply with the increasing temperature. In dephosphorization slag, Ca3(PO4)2 usually formed a solid solution with Ca2SiO4, so the form of phosphorus in the slag was mainly determined by the precipitation form and content of Ca2SiO4. The phases in the dephosphorization slag mainly consisted of a phosphorus-rich phase, an iron-rich phase, and a matrix phase. The results of scanning electron microscopy and X-ray diffraction analyses were consistent with the thermodynamic calculation results.

Dephosphorisation behaviour of blast oxygen furnace (BOF) slag due to carbothermal reduction

Research on mechanism change of temperature effect on dephosphorization in the bottom-blown O 2 -CaO process of semi-steelmaking

Research on mechanism change of temperature effect on dephosphorization in the bottom-blown O2-CaO process of semi-steelmaking

Behavior of Carbothermal Dephosphorization of Phosphorus-Containing Converter Slag and Its Resource Utilization

Effect of highly oxidizing converter dephosphorization slag on dephosphorization behaviour of molten steel

Optimization Dephosphorization Process of the Early Stage in 300t Steelmaking Converter with Top and Bottom Combined Blowing

Study on the recovery of phosphorus and iron from molten modified high-phosphorus industrial slag by carbothermal reduction

Effect of CaO-MgO-FeO-SiO2-xNa2O Slag System on Converter Dephosphorization

Study on Metallurgical Characteristics of the Bottom-Blown O2–CaO Converter

Dephosphorization in New Double Slag Converter Steelmaking Process with High‐Temperature Laboratorial Experiments

Evaluating the Effect of MgO/Al2O3 Ratio on Thermal Behaviors and Structures of Blast Furnace Slag with Low Carbon Consumption

Effect of Aluminium Sulfate on Carbothermal Reduction of Phosphorite in a Fluidized Bed

Numerical Study of the Reduction Process in an Oxygen Blast Furnace

Study on oxygen blowing optimisation of reducing (FeO) content in slag in EAF steelmaking process with high ratio of hot metal to scrap

Melting–Dropping Property of Blast Furnace Charge on the Basis of its Slag Formation Behavior

Oxidizing Decarbonization Characteristics of MgO–C Refractories for Electric Arc Furnace Steelmaking with CO2 Utilization

Kinetics of Dephosphorization at Different Slag Basicities in the Double Slag Converter Steelmaking Process

Factors Influencing Dephosphorization of Low Carbon Steel in Converter

Effect of Temperature on Dephosphorization of Hot Metal in Double‐Slag Converter Steelmaking Process by High‐Temperature Laboratorial Experiments

Study on Efficient Dephosphorization in Converter Based on Thermodynamic Calculation

Effect of CO–CO2 and H2–H2O on the reduction degree of fluxed pellets: reduction mechanism within hydrogen-rich blast furnace