Abstract:The iron element in electric arc furnace (EAF) slag is extremely difficult to recycle due to the low specific magnetic susceptibility of the RO phase (a solid solution of FeO, MgO, CaO, and MnO). Landfilling EAF slag is strictly forbidden for environmental consideration because of poisonous Cr6+ leaching. The original RO phase could be transformed to a spinel structure, whose specific magnetic susceptibility is much higher than that of other minerals, through hot modification, resulting in significantly increased iron recovery by magnetic separation. Precipitation of spinel crystals encloses chromium, such that iron and chromium could be recovered simultaneously. The chromium in obtained iron concentrates is considerably useful for stainless steel making rather than polluting the environment. As a result, recovering iron and chromium is truly beneficial for cleaner production. Hot modification of EAF slag should be conducted at 1500–1600 °C for at least 60 min to guarantee homogeneous liquid slag. The liquid slag was poured onto an iron mold to obtain modified slag (MS) through air quenching. MS was characterized by thermodynamic analysis, X-ray diffraction, and scanning electron microscopy combined with energy-dispersive spectroscopy to correlate the relationship between mineral structures and iron recovery. The iron recovery rate of MS first increased and then decreased with increasing modifier. It was less than 10% when the modifier addition amount was below 12 wt.%, but it increased rapidly as the modifier addition amount increased from 16 to 24 wt.%, mainly due to spinel formation. The highest iron recovery rate was 81.9% when the modifier amount reached 20 wt.%. Meanwhile, Cr6+ was enriched in the spinel phase but was not observed in other minerals. Industrial tests were performed on-site with the modifier ranging from 12 to 18 wt.% because additional heat was not provided during the tests. Results showed that MS with 18 wt.% modifier addition exhibited an iron recovery rate of 61.0%, much higher than that (34.6%) of the original slag.

Study on oxygen blowing optimisation of reducing (FeO) content in slag in EAF steelmaking process with high ratio of hot metal to scrap

Evaluating the Effect of MgO/Al2O3 Ratio on Thermal Behaviors and Structures of Blast Furnace Slag with Low Carbon Consumption

Simulation research on oxygen mass transfer between steel and slag in IF steel refining process

Study on oxygen side-blown reducing furnace and smelting reduction process of high-lead slag

Analysis and optimisation on the energy consumption of electric arc furnace steelmaking

Effect of FeO Content on Foaming and Viscosity Properties in FeO-CaO-SiO2-MgO-Al2O3 Slag System

Numerical Investigation of the Limit of Coke Rate Reduction in an Ironmaking Blast Furnace (BF)

Regulation of Slag Mode of Steelmaking in Electric Arc Furnace by Controlling Electrical Parameters during Oxidation at Melting

Physical Simulation Study on Flow Field Characteristics of Molten Steel in 70t Ladle Bottom Argon Blowing Process

New steelmaking process based on clean deoxidation technology

The method of reducing energy consumption in large blast furnace smelting by low-silicon smelting

Optimization of Oxygen Injection Conditions with Different Molten Steel Levels in the EAF Refining Process by CFD Simulation

Computational Fluid Dynamics Study of the Thermochemical Behaviors in an Ironmaking Blast Furnace with Oxygen Enrichment Operation

A coupled mathematical model and experimental validation of oxygen transport behavior in the electro-slag refining process

Optimization of melting process of 50 t ultra-high electric arc furnace

Influence of bottom-blowing gas species on the nitrogen content in molten steel during the EAF steelmaking process

Enhancing Efficiency in Electric Arc Furnace Steelmaking: A Multi‐Objective Optimization Approach Using the Non‐Dominated Sorting Genetic Algorithm II

Process Practice of Hot Metal Charging Rate for an 100t Direct Current Arc Furnace

Dephosphorization of high silicon hot metal based on double slag converter steelmaking technology

Influence of Reduction Temperatures on Reduction of FeO-Containing Slag by Agricultural Waste

Novel method for improving iron recovery from electric arc furnace slag: on-site hot modification