Abstract:Given the accelerating depletion of iron ore resources, there is growing concern within the steel industry regarding the availability of high-phosphorus iron ore. However, it is important to note that the utilization of high-phosphorus iron ore may result in elevated phosphorus content and notable fluctuations in molten iron, thereby imposing additional challenges on the dephosphorization process in steelmaking. The most urgent issue in the process of converter steelmaking is how to achieve efficient dephosphorization. In this study, the influence of various factors on the logarithm of the phosphorus balance distribution ratio (lgLp), the logarithm of the P2O5 activity coefficient (lgγP2O5), and the logarithm of the phosphorus capacity (lgCp) were examined through thermodynamic calculations. The impact of each factor on dephosphorization was analyzed, and the optimal conditions for the dephosphorization stage of the converter were determined. Furthermore, the influence of basicity and FetO content on the form of phosphorus in the slag was analyzed using FactSage 7.2 software, and the precipitation rules of the slag phases were explored. The thermodynamic calculation results indicated that increasing the basicity of the dephosphorization slag was beneficial for dephosphorization, but it should be maintained below 3. The best dephosphorization effect was achieved when the FetO content was around 20%. The reaction temperature during the dephosphorization stage should be kept low, as the dephosphorization efficiency decreased sharply with the increasing temperature. In dephosphorization slag, Ca3(PO4)2 usually formed a solid solution with Ca2SiO4, so the form of phosphorus in the slag was mainly determined by the precipitation form and content of Ca2SiO4. The phases in the dephosphorization slag mainly consisted of a phosphorus-rich phase, an iron-rich phase, and a matrix phase. The results of scanning electron microscopy and X-ray diffraction analyses were consistent with the thermodynamic calculation results.

Phosphorus Migration Behavior in the Process of Converter Slag Gasification Dephosphorization

Effect of highly oxidizing converter dephosphorization slag on dephosphorization behaviour of molten steel

Behavior of Carbothermal Dephosphorization of Phosphorus-Containing Converter Slag and Its Resource Utilization

Study on Efficient Dephosphorization in Converter Based on Thermodynamic Calculation

Leaching behavior and microstructure of phosphorus in converter slag

A Kinetic Study on Selective Leaching of Phosphorus from Dephosphorization Slag

Efficient extraction of phosphate from dephosphorization slag by hydrochloric acid leaching

Study on the recovery of phosphorus and iron from molten modified high-phosphorus industrial slag by carbothermal reduction

Influence of the Basicity on Phosphorus Enrichment Properties of Decarbonization Slag in Low‐Carbon Double Slag Converter Steelmaking Process with Industrial Experiments, Mineralogy, and Ion–molecule Coexistence Theory

Separation and recovery of phosphorus from steelmaking slag via a selective leaching–chemical precipitation process

Effect of CaO-MgO-FeO-SiO2-xNa2O Slag System on Converter Dephosphorization

Dephosphorization in New Double Slag Converter Steelmaking Process with High‐Temperature Laboratorial Experiments

Separation of Phosphorus from Phosphorus-concentrated Steelmaking Slag

Phosphorus Removal from Wastewater Using Electric Arc Furnace Slag Aggregate

Mechanistic insight into phosphorus migration pathways from oolitic hematite using in-situ observations during roasting and reduction process

Kinetics of Dephosphorization at Different Slag Basicities in the Double Slag Converter Steelmaking Process

Study on the Effect of Different Factors on the Change of the Phosphorus-Rich Phase in High Phosphorus Steel Slag

Enrichment of Phosphorus Oxide in Steelmaking Slag by Utilizing Capillary Action

Effect of Temperature on Dephosphorization of Hot Metal in Double‐Slag Converter Steelmaking Process by High‐Temperature Laboratorial Experiments

Factors Influencing Dephosphorization of Low Carbon Steel in Converter

Remove and Recover Phosphorus During Anaerobic Digestion of Excess Sludge by Adding Waste Iron Scrap