Abstract:The iron element in electric arc furnace (EAF) slag is extremely difficult to recycle due to the low specific magnetic susceptibility of the RO phase (a solid solution of FeO, MgO, CaO, and MnO). Landfilling EAF slag is strictly forbidden for environmental consideration because of poisonous Cr6+ leaching. The original RO phase could be transformed to a spinel structure, whose specific magnetic susceptibility is much higher than that of other minerals, through hot modification, resulting in significantly increased iron recovery by magnetic separation. Precipitation of spinel crystals encloses chromium, such that iron and chromium could be recovered simultaneously. The chromium in obtained iron concentrates is considerably useful for stainless steel making rather than polluting the environment. As a result, recovering iron and chromium is truly beneficial for cleaner production. Hot modification of EAF slag should be conducted at 1500–1600 °C for at least 60 min to guarantee homogeneous liquid slag. The liquid slag was poured onto an iron mold to obtain modified slag (MS) through air quenching. MS was characterized by thermodynamic analysis, X-ray diffraction, and scanning electron microscopy combined with energy-dispersive spectroscopy to correlate the relationship between mineral structures and iron recovery. The iron recovery rate of MS first increased and then decreased with increasing modifier. It was less than 10% when the modifier addition amount was below 12 wt.%, but it increased rapidly as the modifier addition amount increased from 16 to 24 wt.%, mainly due to spinel formation. The highest iron recovery rate was 81.9% when the modifier amount reached 20 wt.%. Meanwhile, Cr6+ was enriched in the spinel phase but was not observed in other minerals. Industrial tests were performed on-site with the modifier ranging from 12 to 18 wt.% because additional heat was not provided during the tests. Results showed that MS with 18 wt.% modifier addition exhibited an iron recovery rate of 61.0%, much higher than that (34.6%) of the original slag.

Wet magnetic separation of phosphorus containing phase from modified BOF slag

A Novel Process for Separation of Magnetite and Phosphorous Phases from a CaO–SiO2–FeO–P2O5 Slag

Thermodynamic Analysis of Mineral Phase Composition of Steel Slag System

Study on the Effect of Different Factors on the Change of the Phosphorus-Rich Phase in High Phosphorus Steel Slag

Distribution and enrichment of phosphorus in solidified BOF steelmaking slag

A Kinetic Study on Selective Leaching of Phosphorus from Dephosphorization Slag

Leaching behavior and microstructure of phosphorus in converter slag

Effect of Basicity on the Solid Solution Behavior of Phosphorus and In Situ Separation of nC2S–C3P Solid Solution from Molten Steelmaking Slag via Super-Gravity

Study on the recovery of phosphorus and iron from molten modified high-phosphorus industrial slag by carbothermal reduction

Separation and recovery of phosphorus from steelmaking slag via a selective leaching–chemical precipitation process

Separation of Phosphorus from Phosphorus-concentrated Steelmaking Slag

Synergetic modification of industrial basic oxygen furnace slag and copper slag for efficient iron recovery

Phosphorus partitioning and recovery of low-phosphorus iron-rich compounds through physical separation of Linz-Donawitz slag

Novel method for improving iron recovery from electric arc furnace slag: on-site hot modification

Efficient extraction of phosphate from dephosphorization slag by hydrochloric acid leaching

Magnetic sludge byproducts for adsorptive phosphorus removal: Resource recovery from iron-based anaerobic sewage sludge

Experimental Study on the Formation of V-Rich Spinel Phase in CaO-SiO2-MgO-FeOt-Al2O3-V2O3-P2O5 Slags at 1573 K (1300 °C)

Magnetic separation characteristics of steel slag powder in a fluidized dry magnetic network separator

Effect of Oily Sludge Treatment with Molten Blast Furnace Slag on the Mineral Phase Reconstruction of Water-Quenched Slag Properties

KEY FACTORS FOR THE SEPARATION OF SILICON AND IRON DURING PHOSPHORUS RECOVERY FROM SLAG DISCHARGED FROM THE DOUBLE-SLAG REFINING PROCESS

Enrichment of Phosphorus Oxide in Steelmaking Slag by Utilizing Capillary Action