Abstract:To understand the effect of CaCl2 addition on the dephosphorization ability of steelmaking slags, laboratory experiments were carried out to study the phosphorus distribution between CaO–SiO2–FeOx–P2O5–CaCl2 slags and carbon-saturated iron at steelmaking temperature. The phosphorus distribution ratio between slag and pure iron foil (\( L_{\text{P}}^{{{\text{Fe-}}\gamma }} \)) was measured by equilibrium experiments and converted into the phosphorus distribution ratio between slag and carbon-saturated iron (\( L_{\text{P}}^{{\text{Fe}}{-}{\text{C}}} \)) using thermodynamic calculations. The influential mechanism of CaCl2 was also discussed based on the phases in the slags. It was found that the addition of CaCl2 is beneficial for the improvement of \( L_{\text{P}}^{{{\text{Fe}}{-}{\text{C}}}} \). In the slag with basicity (R = [w(CaO)/w(SiO2)]) of 1.0, the P content in the liquid slag was increased by the addition of CaCl2. When the basicity is sufficiently high (e.g., R≥1.5), the addition of CaCl2 enhances the generation of P-rich solid phases, including both 2CaO·SiO2–3CaO·P2O5 (C2S–C3P) and Ca5Cl(PO4)3. Compared with CaCl2-free slags, CaCl2 addition in BOF slags doesn't evidently change the effects of slag basicity and FeOx content. With the increase of slag basicity (1.0 to 2.0), the amount of C2S–C3P solid solution in the slag climbs obviously, resulting in a higher \( L_{\text{P}}^{{{\text{Fe}}{-}{\text{C}}}} \) both in CaCl2-added slags and CaCl2-free slags, while \( L_{\text{P}}^{{{\text{Fe}}{-}{\text{C}}}} \) increases first and then decreases when the FeOx content varies from 15 to 35 pct in this study.

Distribution and enrichment of phosphorus in solidified BOF steelmaking slag

Thermodynamic Analysis of Mineral Phase Composition of Steel Slag System

Wet magnetic separation of phosphorus containing phase from modified BOF slag

Enrichment of Phosphorus Oxide in Steelmaking Slag by Utilizing Capillary Action

A review on the P enrichment and recovery from steelmaking slag: Towards a sustainable P supply and comprehensive utilization of industrial solid wastes

Effect of CaCl2 Addition on Phosphorus Distribution Between CaO–SiO2–FeOx–P2O5 Slag and Carbon-Saturated Iron at Steelmaking Temperature

Distribution Behavior Of Vanadium, Chromium And Phosphorous Between Basic Slag And Semi-Steel

Leaching behavior and microstructure of phosphorus in converter slag

Study on the Effect of Different Factors on the Change of the Phosphorus-Rich Phase in High Phosphorus Steel Slag

Effect of Basicity on the Solid Solution Behavior of Phosphorus and In Situ Separation of nC2S–C3P Solid Solution from Molten Steelmaking Slag via Super-Gravity

A Kinetic Study on Selective Leaching of Phosphorus from Dephosphorization Slag

Effect of Al2O3 on the Molten Slag Microstructure Information by Molecular Dynamics Simulation and Experimental Analysis

Hydration properties of basic oxygen furnace steel slag

Influence of FeO activity on sulfur distribution ratio in steel slag

A Novel Process for Separation of Magnetite and Phosphorous Phases from a CaO–SiO2–FeO–P2O5 Slag

Separation of Phosphorus from Phosphorus-concentrated Steelmaking Slag

Structural Characterization of Phosphorous Slag Regarding Occurrence State of Phosphorus in Dicalcium Silicate

Separation and recovery of phosphorus from steelmaking slag via a selective leaching–chemical precipitation process

Phosphorus Distribution between CaO-CaF2-SiO2 Melts and Carbon-saturated Iron

Phosphorus partitioning and recovery of low-phosphorus iron-rich compounds through physical separation of Linz-Donawitz slag

Influence of the Basicity on Phosphorus Enrichment Properties of Decarbonization Slag in Low‐Carbon Double Slag Converter Steelmaking Process with Industrial Experiments, Mineralogy, and Ion–molecule Coexistence Theory