Abstract:Ternary nickel-rich layered oxide LiNi0.8Co0.1Mn0.1O2 (NCM811) is recognized as a cathode material with a promising future, attributed to its high energy density. However, the pulverization of cathode particles, structural collapse, and electrolyte decomposition are closely associated with the fragile cathode-electrolyte interphases (CEI), which seriously affect the electrochemical performances of ternary high-nickel materials. In this paper, fluorine- and nitrogen-containing methyl-2-nitro-4-(trifluoromethyl)benzoate (MNTB) was selected, which was synergistically regulated with fluoroethylene carbonate (FEC) to generate a robust CEI film. The preferential decomposition of MNTB/FEC results in the formation of an inorganic-rich (Li3N, LiF, and Li2O) CEI film with uniformly dense and stable characteristics, which is conducive to the migration of Li+ and the stability of the NCM811 structure and enhances the cycling stability of the battery system. Simultaneously, MNTB effectively suppresses the adverse reaction associated with increased polarization caused by higher interface impedance due to conventional single FEC additives, further improving the rate capability of the battery. Moreover, MNTB/FEC can effectively eliminate HF, preventing its corrosion on the NCM811 cathode. Under the synergistic effect of MNTB/FEC, after 300 discharge cycles at a high cutoff voltage of 4.3 V and a current density of 1 C (2 mA cm-2), the discharge capacity of the NCM811||Li battery was 150.12 mA h g-1 with a capacity retention of 81.10%, while it was only 32.8% for the standard electrolyte (STD). The discharged capacity of the MNTB/FEC-containing battery was about 115.43 mA h g-1 at the high rate of 7 C, which was considerably higher than that of the STD (93.34 mA h g-1). In this study, the designed MNTB as a novel solvent synergistically regulated with FEC will contribute to the enhanced stability of NCM811 materials at high cutoff voltages and at the same time provide an effective modified strategy to enhance the stability of commercial electrodes.

Artificial interface modification of Ni-rich ternary cathode material to enhance electrochemical performance for Li-ion storage through RF-plasma-assisted technique

Stabilizing high-Ni cathodes with gradient surface Ti-enrichment

Engineering a Robust Interface on Ni-Rich Cathodes via a Novel Dry Doping Process toward Advanced High-Voltage Performance

In-situ Ti4+-doped modification of layer-structured Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode materials for high-energy lithium-ion batteries

Mixed-conducting Interlayer Boosting the Electrochemical Performance of Ni-rich Layered Oxide Cathode Materials for Lithium Ion Batteries

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Plasma-induced amorphous N-nano carbon shell for improving structural stability of LiNi0.8Co0.1Mn0.1O2 cathode

Modulating NCM622 electrode to efficiently boost the lithium storage and thermal safety of its full batteries

Stabilizing Surface Chemistry and Texture of Single-Crystal Ni-rich Cathodes for Li-ion Batteries

Fabrication and interfacial characterization of Ni-rich thin-film cathodes for stable Li-ion batteries

Surface-targeted functionalization of nickel-rich cathodes through synergistic slurry additive approach with multi-level impact using minimal quantity

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries

Enhancing cyclic and in-air stability of Ni-Rich cathodes through perovskite oxide surface coating

Enhancing the Structural Stability and Electrochemical Performance of High-Nickel Cathode Materials through Ti Doping with an Exothermic Non-oxide Precursor

Enhancing the Storage Performance and Thermal Stability of Ni-Rich Layered Cathodes by Introducing Li2MnO3

Concerted Effect of Ion- and Electron-Conductive Additives on the Electrochemical and Thermal Performances of the LiNi0.8Co0.1Mn0.1O2 Cathode Material Synthesized by a Taylor-Flow Reactor for Lithium-Ion Batteries

In situ surface engineering enables high interface stability and rapid reaction kinetics for Ni-rich cathodes

Stabilizing effects of atomic Ti doping on high-voltage high-nickel layered oxide cathode for lithium-ion rechargeable batteries

Stable and Fast Ion Transport Electrolyte Interfaces Modified with Novel Fluorine- and Nitrogen-Containing Solvents for Ni-Rich Cathode Materials

An Interphase Engineering Method of Stabilizing Ni‐rich Cathode in Lithium‐ion Batteries by A Nucleophilic‐based Additive