Abstract:In this study, the continuous alumina fibers reinforced alumina matrix (Al2O3/Al2O3) composites were fabricated through sol–gel method at a sintering temperature range of 900–1400 °C, and their mechanical properties were analyzed separately. To explore the effects of sintering temperature on mechanical properties of composites, the high temperature properties of fibers and matrix were studied in a comprehensive manner. Our results suggested that the composites fabricated at different temperatures exhibited two different fracture features (ductile fracture and brittle fracture). Besides, the 1100 °C fabricated composites possessed the highest flexural strength of nearly 150 MPa. Al2O3 fibers displayed excellent thermal stability, and did not undergo phase transition during the preparation process. However, the grain size of fibers increased dramatically at a sintering temperature of 1200 °C, which led to a significant decrease in the mechanical properties. In the meantime, the surface morphology of fibers became very uneven because of grain coarsening. Due to the phase transition from γ-Al2O3 to α-Al2O3 at 1200 °C, the elastic modulus and microhardness of matrix increased significantly. The higher sintering temperature not only intensified the matrix but also strengthened the interface bonding, thus making the composites prone to brittle fracture. In conclusion, the optimal temperature of composites preparation should be lower than 1200 °C.

Effect of thermal exposure on the microstructure and strength of an alumina‐silica ceramic fiber

Effect of heat‐treatment on the microstructure and room‐temperature mechanical properties of alumina–silica fiber

Microstructural and mechanical characterization of a mullite fiber

Microstructure evolution and mechanical behavior of a mullite fiber heat‐treated from 1100 to 1300°C

The Effects of Mineral Composition and Sintering Temperature on Synthetic Mullite

Effect of high temperature annealing on microstructure and mechanical properties of Morlion735 alumina fiber

Strength degradation of alumina fiber: Irreversible phase transition after high-temperature treatment

Effect of Thermal Exposure on the Interface Microstructure and Interfacial Shear Strength of the SiC Fiber Reinforced AlFe5Si2 Matrix Composite

The Effect of Thermal Exposure on the Microstructures and Mechanical Properties of 2198 Al–Li Alloy

Effect Of Silica Sol On The Properties Of Alumina-Based Duplex Ceramic Cores

Sintering Behavior, Microstructure and Mechanical Properties of Various Fluorine-Containing Y-SiAlON Glass-Ceramics

Effect of silica sol on phase transition of alumina-mullite fibers

Effects of sintering temperature on mechanical properties of alumina fiber reinforced alumina matrix composites

Study of online tensile properties for continuous ceramic fibers under high‐temperature loads

Effect of long-time annealing at high temperature on the microstructure and mechanical properties of different types of SiC fibers

Evolution of microstructures and thermal properties with heat treatment for absorbing, emitting and scattering fibrous medium

High-temperature properties of Al 2 O 3 /SiO 2 composites

Effect of Thermal Exposure on Microstructure Evolution and Mechanical Properties of TC25G Alloy

Effect of hafnium oxide on continuous aluminum oxide-mullite-hafnium oxide composite ceramic fibers

Effect of Alumina Addition on the Properties of Corundum-Mullite Ceramic Matrix

Mechanical properties and microstructural evolution of Cansas-III SiC fibers after thermal exposure in different atmospheres