Abstract:Alloy 718 is commonly used in the maritime and aerospace industries due to its strength and durability, particularly in engine rotating components such as disks, fan blades, and high-pressure compressors. As a new type of 3D printing technology, directed energy deposition (DED) can employ lasers to melt metal powders or wires to fabricate arbitrary-shaped workpieces directly from customized data, thereby making machining more synergistic and intuitive. However, the surface properties of the DED-printed alloy 718 samples, such as surface roughness and wear resistance, are typically subpar. By introducing severe plastic deformation to the near-surface, ultrasonic nanocrystal surface modification (UNSM) can be used as a post-processing method and results in altered properties. The uniaxial tensile test reveals that the UNSM-treated alloy 718 exhibits a higher mechanical property. Moreover, using a fretting test rig in accordance with the cylinder-on-plane agreement, a higher wear resistance for UNSM-treated alloy 718 is observed. This study employs the finite element method to fully comprehend the effect of UNSM on wear performance. The fretting wear process of Inconel 718 alloy is established using an energy-based finite element model. Considering the severe practical scenarios, the Johnson-Cook constitutive model is implemented, with the linear isotropic hardening model capturing the plastic behavior. In comparison to experimental measurements, the finite element results demonstrate unprecedented wear loss consistency with an error of less than 2%. Therefore, we conclude that the finite element model built in this study exhibits a high accuracy and can be used to analyze the effect of UNSM on fretting wear behavior. According to finite element analysis, as the normal load increases, the improvement in wear resistance induced by UNSM decreases. Given that the finite element model is based on the energy method, the effects of coefficient of friction (COF) and wear coefficient modified by UNSM are investigated separately. According to the findings, the UNSM-modified COF and wear coefficient play a significant role in determining the wear characteristics. Due to the removal of a substantial amount of material from the central area of the alloy 718 surface by wear, it is also possible to observe that severe plastic strains are primarily concentrated at the edges of the wear scars.

Influence of abrasive deburring in indirect tool wear measurement in micromilling of Inconel 718

Wear Behavior Phenomena of TiN/TiAlN HiPIMS PVD-Coated Tools on Milling Inconel 718

Study on improving surface integrity for additively manufactured Inconel 718 via high-speed micromilling

Investigations on the Surface Integrity and Wear Mechanisms of TiAlYN-Coated Tools in Inconel 718 Milling Operations

Experimental Study on the Effect of Cutting Tool Geometry in Micro-Milling of Inconel 718

Evaluation of the tool wear in the turning process of INCONEL 718 using PCD tools

Experimental and numerical investigation of Inconel 718 machining with worn tools

Study on surface texture and corrosion resistance of ultrasonic vibration-assisted micromilling Inconel718

Optimization of superalloy Inconel 718 micro-milling process by combined Taguchi and multi-criteria decision making method

Experimental Investigation on Laser-Processed Micro-Dimple and Micro-Channel Textured Tools during Turning of Inconel 718 Alloy

Effect of machining parameters on turning process of Inconel 718

Influence of cutting tool geometrical parameters on tool wear in high-speed milling of Inconel 718 curved surface

EXPERIMENTAL INVESTIGATION ON SURFACE INTEGRITY OF END MILLING NICKEL-BASED ALLOY— INCONEL 718

Study on friction reduction performance of granular flow lubrication during the milling of Inconel 718 superalloy

Flank wear assessment on discrete machining process behavior for Inconel 718

Study of Abrasive Wear Mechanism through Nano Machining

Characterization of Tool Wear Mechanisms and Failure Modes of TiAlN-NbN Coated Carbide Inserts in Face Milling of Inconel 718

Wear Behavior of TiAlVN-Coated Tools in Milling Operations of INCONEL® 718

The effect of mesh parameters on computational cost and results in simulation of milling in Inconel 718

Effect of cutting parameters on chips and burrs formation with traditional micromilling and ultrasonic vibration assisted micromilling

Fretting wear behavior of Inconel 718 alloy manufactured by DED and treated by UNSM