Abstract:Laser powder bed fusion ( L -PBF) is a pioneering additive manufacturing (AM) technology for superalloys. The study of the columnar to equiaxial transition (CET) of a superalloy in the L -PBF process is important for controlling the grain morphology of the superalloy and achieving the production of a superalloy with a single-crystal microstructure. This study aims to reveal the fundamental law of CET of superalloys in the L -PBF process. An algorithm was developed to successfully extend the application of the CET model to cover the solidification rate interval of the L -PBF process, and the accuracy of the model was experimentally verified. The extended CET model indicated that the critical temperature gradient from columnar epitaxial growth to equiaxial growth does not increase monotonically with increasing solidification rate but exhibits a peak. The temperature gradient at the solidification interface of the L -PBF molten pool was greater than this peak. In addition, the solidification mode of the alloy remained epitaxial after adjusting the laser power and scanning rate, because adjusting these two parameters exerted a weak effect on the temperature gradient at the solidification interface of the L -PBF molten pool. The excessively high temperature gradient of L -PBF also makes it difficult to change the solidification mode from epitaxial to equiaxial at preheating temperatures below 1000 K. Changes in the morphology of the molten pool due to the increased temperature of the deposited layer are of more concern in terms of microstructure formation. The results of this study are expected to provide guidance for designing process parameters for optimizing the microstructures of superalloys fabricated using L -PBF.

Solidification behavior of Pt-containing 718Plus superalloy

Pseudobinary Phase Diagrams of Eutectic Reaction for Pt‐containing and Pt‐free 718Plus Alloys

Insight into Elongation and Strength Enhancement of Heat-Treated LPBF Ni-based Superalloy 718 Using In-Situ SEM-EBSD

Enhancing tensile properties of wrought Ni-based superalloy ATI 718Plus at elevated temperature via morphology control of η phase

Precipitation behaviors of the rapidly-solidified Allvac 718Plus superalloy during aging treatment

Achieving Enhanced Strength Retention at Elevated Temperatures in Ultrafine-Fibrous Interconnected Al-Ce-Ni Eutectic Alloy Solidified under Super-Gravity Field

Effect of the precipitation of the η-Ni3Al0.5Nb0.5 phase on the microstructure and mechanical properties of ATI 718Plus

Effect of two-step solid solution on microstructure and δ phase precipitation of Inconel 718 alloy

Multiphase-field and experimental study of solidification behavior in a nickel-based single crystal superalloy

Effects of Re and Ru on the Solidification Characteristics of Nickel-Base Single-Crystal Superalloys

Supersolidus liquid phase sintering of Inconel 718 powder alloy

Hot Deformation Behavior of a Powder Metallurgy Superalloy with High γ′ Content

Solidification characteristics and high temperature tensile properties of Ni-based superalloy IN713C

Microscopic phase-field study on L12 interface properties of Ni75Al18Cr7 superalloy

Research Progress of Alloy ATI 718Plus in China

Effect of Ti and Al on Microstructure and Partitioning Behavior of Alloying Elements in Ni-based Powder Metallurgy Superalloys

Solidification Behavior of Ni-based Superalloy at Different Cooling Rates

Effect of Ta addition on solidification microstructure and element segregation of IN617B nickel-base superalloy

Effect of Carbon and Boron Additions on Segregation Behavior of Directionally Solidified Nickel-Base Superalloys with Rhenium

Solidification and Segregation Behaviors of Superalloy IN718 at a Slow Cooling Rate

Investigation of columnar to equiaxial transition criterion and solidification conditions for Ni-based superalloy in laser powder bed fusion