Abstract:Polycrystalline Ni3Al-based superalloy with up to 70% <math>γ′</math> phase owns excellent strength at around 1100 °C. It has been successfully used as a substitute for turbine blade crown, which is one of the aircraft components working in the severest environment (i.e., sometimes nearly overheating). However, few studies concentrate on the coarsening resistance and phase thermal stability in this newly designed polycrystalline superalloy at the working temperature, hence, directional coarsening behavior of primary <math>γ′</math> <math>(γI′)</math> has remained restricted. This paper investigated directional coarsening behavior of <math>γI′</math> during aging treatment (1100 °C) after overheating at 1270 °C with furnace cooling (SFA), air cooling (SAA) and water cooling (SWA) respectively. It clearly showed that <math>γI′</math> grew into lamellar and gradually became irregular during the directional coarsening process. Moreover, its morphological combination mode was illustrated. Since parallel short lamellar <math>γI′</math> connected each other, long lamellar formed. When perpendicular long lamellar <math>γI′</math> connected each other, it became L-type or T-type, i.e., precursor of irregular <math>γI′</math>. The kinetics of directional coarsening regime of <math>γI′</math> was in line with the matrix-diffusion-controlled (MDC) theory according to the evaluation of <math>γI′</math> size. This was caused by higher migration of <math>γI′</math> interfaces than the diffusion of solute elements. It was also confirmed that driving force of directional coarsening mainly depended on the competition of elemental diffusion, lattice misfit distribution and <math>γ</math> channel distance.

Precipitation behaviors of the rapidly-solidified Allvac 718Plus superalloy during aging treatment

Atomic-scale study on the precipitation behavior of an Al-Zn-Mg-Cu alloy during isochronal aging

Precipitation behavior of γ′ phase with a multi-model morphology in the Ni-based superalloy GH4720Li during water quenching and subsequent artificial aging and related mechanisms

Investigation of Precipitation Behavior of a Novel Ni-Fe-Based Superalloy during High-Temperature Aging Treatment

Effects of Microstructure Evolution on the Deformation Mechanisms and Tensile Properties of a New Ni-base Superalloy During Aging at 800 °C

Growth and dissolution behavior and morphology evolution of γ' precipitates in GH4742 nickel-based superalloy

Enhancing tensile properties of wrought Ni-based superalloy ATI 718Plus at elevated temperature via morphology control of η phase

Evolution of microstructure and δ phase in an aging-treated nickel-based superalloy during hot compression

Effect of high temperature aging on microstructures and tensile properties of a selective laser melted GTD222 superalloy

The Precipitation Mechanism of the Secondary Phase in Inconel 617B Alloy During Ageing

Study of Aging Temperature on the Thermal Compression Behaviors and Microstructure of a Novel Ni-Cr-Co-Based Superalloy

Effect of Heat Treatment on the Microstructure and Fracture Behaviors of a Ni–Cr–Fe Superalloy

Aging process design based on the morphological evolution of γ′ precipitates in a 4th generation nickel-based single crystal superalloy

Coarsening kinetics of γ′ phase in isothermal aged high Al content Ni–17 at.% Al alloy

Correlations Between Microstructure Evolution and Mechanical Behavior of a Nickel-Based Single Crystal Superalloy with Long-Term Aging Effects

Evolution of Lattice Spacing of Gamma Double Prime Precipitates During Aging of Polycrystalline Ni-Base Superalloys: an in Situ Investigation

Effect of Long-Term Aging on the Microstructures and Stress Rupture Properties of a Ni-Based Single Crystal Superalloy at 980°C

Directional coarsening behavior of primary γ′ phase in Ni3Al-based superalloy during aging heat treatment

Short Study on Mechanism of Morphology Change of γ′ Precipitates in IN718 Plus

On the early stages of precipitation during direct ageing of Alloy 718

Precipitation behaviors of the rapidly-solidified CoCrFeNiTi high-entropy alloy during aging treatment